Specifications

56
O-rings for D.O. Sensors and pH Electrodes
Part Number Compatible Probes Quantity
300-P101 F-600, F-607 and F-615 FermProbes 3 sets
300-P102 F-695 and F-635 Fermprobes 3 sets
and 12 mm D.O. OxyProbes
®
External O-rings for 12 mm D.O. Sensors and FermProbe
®
pH Electrodes
The Viton o-ring and Teflon washer found on 12 mm D.O. sensors is the same as those found on FermProbes with metric
threads. These seals should last the lifetime of the sensor or electrode, but replacements can be purchased in sets of three.
&
&
T I P S H I N T S
T I P S H I N T S
The difference between the above two sets of o-rings is the
Teflon washer. Electrodes with the Pg13.5 metric threads
require a beveled Teflon washer, which allows the o-ring
and electrode to seat better when threaded into a metric
threaded port or headplate. A bevel is not required for a
FermProbe to seal correctly in a standard housing.
Part Number Description Quantity
AG-S013-04 FermProbe connector o-ring 4
AG-S013-25 FermProbe connector o-ring 25
O-rings for FermProbe Connectors
In order to keep moisture out of the connector during autoclaving, FermProbes have a small o-ring gasket at the base of the
connector. These o-rings should last the lifetime of the electrode. However, they may need to be replaced on occasion due
to loss during handling.
D145
OxyProbe
Replacement Set Shown Actual Size
Actual Size
O-ring
F-615
FermProbe
F-600
FermProbe
F-635
FermProbe
F-635
FermProbe
ance Maintenance Maintenance Maintenance Maintenance Maint
FermProbe O-ring Sets
Size
-111 Viton
Size -013
Silicone
Teflon
Washer
Broadley-James Corporation (U.S. & Canada) Toll-Free: 800-288-2833 E-mail: [e-mail]
C
M
Y
CM
MY
CY
CMY
K
56-o-rings_2013.pdf 1 8/11/14 10:39 AM