Specifications

65
ies Accessories Accessories Accessories Accessories Accessorie
Chamfered 25 mm Threaded Port
Part Number Description
AF-110-60-L040 Standard threaded port,
chamfered (15º angle), 25 mm i.d.
Chamfered
Threaded
Port
Chamfered 25 mm Plug
Part Number Description
AF-310-61-L040 Chamfered plug,
25 mm o.d.
Chamfered
Plug
&
&
T I P S H I N T S
T I P S H I N T S
Although the 25 mm threaded port
is a standard within the biotech industry, the term "stan-
dard port" is no guarantee that t wo ports will be exac tly
the same. The overall length of a 25 mm port may var y
from tank to tank. This variation is often due to the wall
thickness of the tank and the manufacturer’s specifica-
tions. If a particular sensor or plug is not sealing properly
in a port, measure the length of the port and compare it
to the position of the o-ring. Perhaps a different plug or
sensor will work better.
Ports & Plugs
Chamfered 25 mm Threaded Port
This port style is the one most commonly found in the biotech industry. Proper installation will yield a side mounted port at
15˚ above horizontal. This angle is ideal for D.O. or pH measurement. The measured length is 40 mm from the top of the port
to the bottom of the longer side.
Chamfered 25 mm Plug
When properly
i
nstalled, the bottom of this plug should be flush with
the tank wall. The length is 40 mm from the inside flange to the end of
the longer side of the plug.
Broadley-James Corporation (U.S. & Canada) Toll-Free: 800-288-2833 E-mail: [e-mail]
C
M
Y
CM
MY
CY
CMY
K
65-ports-plugs_2013.pdf 1 8/11/14 10:44 AM