Quick Guide

ManualsBrandsSharp ManualsProjectorPG-MB60X

MODEL

PG-MB60X

MULTIMEDIA PROJECTOR

SETUP GUIDE

Screen Size and Projection Distance ................... 2

Connecting Pin Assignments................................ 3

RS-232C Specifications and Commands ............. 4

Dimensions ............................................................. 6

Summary of content (6 pages)

PAGE 1
MULTIMEDIA PROJECTOR MODEL PG-MB60X SETUP GUIDE Screen Size and Projection Distance ................... 2 Connecting Pin Assignments ................................ 3 RS-232C Specifications and Commands ............. 4 Dimensions .............................................................
PAGE 2
Screen Size and Projection Distance The projection screen size varies according to the distance from the lens of the projector to the screen. Install the projector so that projected images are projected onto the screen at the optimum size by referring to the table below. Use the values in the table as a reference when installing the projector. Side View Screen H Lens center L NORMAL Mode (4:3) Diag.
PAGE 3
Connecting Pin Assignments INPUT 1/INPUT 2 and OUTPUT RGB Signal Terminal: 15-pin Mini D-sub female connector RGB Input 11 15 1 6 5 10 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. Component Input Video input (red) Video input (green/sync on green) Video input (blue) Not connected Not connected Earth (red) Earth (green/sync on green) Earth (blue) Not connected GND Not connected Bi-directional data Horizontal sync signal: TTL level Vertical sync signal: TTL level Data clock 1. 2. 3. 4. 5. 6. 7.
PAGE 4
RS-232C Specifications and Commands Computer control A computer can be used to control the projector by connecting an RS-232C serial control cable (cross type, commercially available) to the projector. (See page 27 of the projector’s operation manual for connection.) Communication conditions Set the serial port settings of the computer to match that of the table. Signal format: Conforms to RS-232C standard.
PAGE 5
RS-232C Specifications and Commands Control Contents INPUT 1 Resize : Normal INPUT 1 Resize : Dot By Dot INPUT 1 Resize : Border INPUT 1 Resize : Stretch INPUT 2 Resize : Normal INPUT 2 Resize : Dot By Dot INPUT 2 Resize : Border INPUT 2 Resize : Stretch INPUT 3 Resize : Normal INPUT 3 Resize : Border INPUT 3 Resize : Stretch INPUT 4 Resize : Normal INPUT 4 Resize : Border INPUT 4 Resize : Stretch INPUT 1 Picture Mode : Standard INPUT 1 Picture Mode : Presentation INPUT 1 Picture Mode : Cinema INPUT 1 Pict
PAGE 6
Dimensions Units: inches (mm) Side View (1.5) Rear View Side View 9/64 (3.25) 11 7/64 (282) 1/16 Top View 12 7/32 (310) 2 3/16 (55.5) 3 33/64 (89) 13/64 (5) Front View 1 59/64 (48.5) 2 11/64 (55.05) 3 15/16 (99.95) 5 7/64 (129.5) 5 7/64 (129.5) 7 1 5/32 1 /32 (29.1) (30.9) M4 M4 5/8 9/16 (14) (15.5) 1 3/4 1 7/32 (44.1) (30.9) -6 8 7/8 (225.3) M4 8 9/32 (210.3) M4 4 3/16 (106.