Operating instructions

CONTENTS

SV Card Link

Note

SV Card Link cannot be launched while SV Photo Capture is

running.

Capturing and saving images

4 Click on the thumbnail of the file to be loaded to select

it.

• Click successively on two thumbnails while pressing the

“Shift” key on the keyboard to select the thumbnails that

lie in the area of the two thumbnails you have clicked

on.

• Multiple thumbnails can be selected by clicking on the

thumbnails while pressing the “Ctrl” key on the keyboard.

5 Click .

SV Card Link can be used to capture still pictures stored on a

VIEWCAM’s media card directly into your computer.

This function can only be used if your VIEWCAM is equipped with

a media card.

Preparations

1 Check that a media card is mounted in the VIEWCAM.

Connect the VIEWCAM to the computer.

• For details on connections, refer to the operation manual

of your VIEWCAM.

2 Turn on the VIEWCAM’s power and set it to the VCR

mode.

Do not turn off the VIEWCAM’s power while SV Card Link is running.

Launching SV Card Link

3 Select the “Program” menu from “Start” on the task

bar, then click on “SV Card Link” in the “PixLab Lite”

folder, or double click the short-cut icon on the

desktop.

• SV Card Link is launched and data transfer with the

VIEWCAM starts. Once data transfer is completed, the

files on the media card are displayed as thumbnails.