User Manual

1. Install the remote control batteries

1. Place your nger on the part marked with the

▲, and then pull the cover o󰀨.

2. See the instructions in the compartment and

put in the batteries (R03 or LR03 (“AAA”

size) x 2) with their plus (+) and minus (-)

sides oriented correctly.

3. Close the cover.

NOTE: • When the batteries become exhausted, replace them with new

(commercially available) batteries.

• The supplied batteries may become exhausted quickly depending on how

they are stored.

• If you will not be using the remote control for a long time, remove the

batteries.

• Use manganese or alkaline batteries only.

2. Connect external equipment

• To protect the external equipment, disconnect the power cord of this product before

making connections.

: Other signals

: Video signal

: Audio signal

LAN port

RS-232C input terminal

AUDIO OUT terminal (Audio output terminal)

USB Type-A port (USB port)

AUDIO IN terminal (Audio input terminal)

VGA input terminal (D-sub input terminal)

HDMI input terminals (HDMI1 (ARC)/HDMI2/HDMI3)