User Manual

9
ENGLISH
3. Connect the supplied power cord
NOTE: • Please make sure that enough power is supplied to the monitor.
• The main power must be turned on/o󰀨 with the main power switch. Do not
connect/disconnect the power cord or turn the breaker on/o󰀨 while the main
power switch is on.
• For a complete electrical disconnection, pull out the main plug.
• Connect the power cord to the monitor before plugging it into the power
outlet.
• The power outlet shall be installed near the equipment and shall be easily
accessible.
Cable clamp
For power outlet
Main power switch
(PN-HE751/PN-HC861/PN-HC751)
Main power switch (PN-HE651/PN-HC651)
Remote control sensor
Be careful not to damage the remote control sensor during installation.
Remote control sensor
PN-HE751/PN-HC861/PN-HC751
Remote control sensor
PN-HE651/PN-HC651