ENGLISH FRANÇAIS PN-K322B ESPAÑOL LCD MONITOR MONITEUR LCD MONITOR LCD SETUP MANUAL MANUEL D’INSTALLATION MANUAL DE INSTALACIÓN ENGLISH ....... E1 FRANÇAIS...... F1 ESPAÑOL .....
IMPORTANT: To aid reporting in case of loss or theft, please record the product’s model and serial numbers in the space provided. The numbers are located in the rear of the product. Model No.: Serial No.: U.S.A.
Contents Adjustment of monitor position......................................5 Connections......................................................................6 Turning Power On/Off.......................................................7 Specifications...................................................................8 Mounting Precautions (For SHARP dealers and service engineers)..................8 ENGLISH IMPORTANT INFORMATION.............................................1 DEAR SHARP CUSTOMER..........
SAFETY PRECAUTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and/or fire. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product.
SAFETY PRECAUTIONS (Continued) This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate counter measures. To maintain compliance with EMC regulations, use shielded cables to connect to the following terminals: HDMI input terminal and DisplayPort input terminal. ENGLISH WARNING: If a monitor is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling.
MOUNTING PRECAUTIONS • This product is for use indoors. • A mounting bracket compliant with VESA specifications is required. • To install on a stand (commercially available) or on a wall, or to remove or move the monitor, consult your dealer. • Mounting the monitor on the wall requires special expertise and the work must be performed by an authorized SHARP dealer. You should never attempt to perform any of this work yourself.
Supplied Components Liquid Crystal Display Monitor: 1 Touch pen: 1 Cable cover: 1 Power cord: 1 AC adapter: 1 CD-ROM (Utility Disk for Windows): 1 Setup Manual (this manual): 1 DisplayPort cable: 1 RS-232C conversion cable (Φ3.
Connections Caution • Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/disconnecting cables. Also, read the manual of the equipment to be connected. • Be careful not to confuse the input terminal with the output terminal when connecting cables. Accidentally reversing cables connected to the input and output terminals may cause malfunctions and the other problems. • Do not use any cable that has a damaged or deformed terminal.
Turning Power On/Off • Turn on the monitor first before turning on the PC or playback device. Turning on the main power Turning power on/off Press the power button ( ) to turn the power ON/OFF. To turn off the power, press and hold down the power button ( for about 2 seconds. Power button ( ) ) ENGLISH Caution Power LED Power lamp status Main power switch Caution • The main power must be turned on/off with the main power switch.
Specifications Model Power requirement Operating temperature Operating humidity Power consumption Dimensions (excluding protrusions) Weight PN-K322B AC 100 V - 240 V, 50/60 Hz (when using the supplied AC adapter) 41°F to 95°F (5°C to 35°C) 20% to 80% (no condensation) 97 W * (when using the supplied AC adapter) inch (mm) Monitor only Approx. 29-17/32(W) x 1-27/64(D) x 17-3/8(H) (750 x 36 x 441) Monitor on supplied stand • Monitor screen angle 90° (from horizontal) Approx.
Table des matières INFORMATION IMPORTANTE..........................................1 CHER CLIENT....................................................................1 PRÉCAUTIONS DE SÉCURITÉ........................................2 MESURES DE SÉCURITÉ.................................................3 PRÉCAUTIONS POUR LE MONTAGE..............................4 Composants fournis.........................................................5 [FRANÇAIS] Réglage de la position du moniteur............................
PRÉCAUTIONS DE SÉCURITÉ L’électricité remplit de nombreuses fonctions utiles, mais elle peut provoquer des blessures et des dégâts matériels si elle n’est pas utilisée correctement. Cet appareil a été conçu et fabriqué en attachant la plus grande importance à la sécurité. Cependant, une utilisation inadéquate peut entraîner une décharge électrique et/ou un incendie.
PRÉCAUTIONS DE SÉCURITÉ (Suite) AVERTISSEMENT : Ce produit appartient à la Classe A. Dans un environnement résidentiel, il peut provoquer des interférences radio et, dans ce cas, l’utilisateur peut être obligé de prendre les mesures nécessaires. Afin de satisfaire aux normes EMC, utiliser des câbles blindés pour connecter les bornes suivantes : Borne d’entrée HDMI et borne d’entrée DisplayPort. FRANÇAIS Un moniteur placé sur un support instable est dangereux en raison des risques de chute qu’il présente.
PRÉCAUTIONS POUR LE MONTAGE • Ce produit est destiné à être utilisé en intérieur. • Un support de montage conforme aux spécifications VESA est nécessaire. • Pour installer le moniteur sur un support (en vente dans le commerce) ou sur un mur, ou pour le démonter ou le déplacer, consultez votre revendeur. • Le montage du moniteur sur le mur demande des compétences techniques spéciales et le travail doit être fait par un revendeur agréé par SHARP. Vous ne devez jamais tenter de faire ce travail vous-même.
Composants fournis Si un composant venait à manquer, veuillez contacter votre revendeur.
Connexions Attention • Veillez à bien mettre hors tension l’interrupteur principal puis débranchez la prise de l’alimentation secteur avant de connecter ou de déconnecter les câbles. Lisez également le manuel de l’équipement à connecter. • Veillez à ne pas confondre la borne d’entrée avec la borne de sortie quand vous connectez les câbles. En confondant les câbles branchés aux bornes d’entrée et de sortie, vous pouvez causer des dysfonctionnements et d’autres problèmes.
Mise sous tension et hors tension Attention • Mettez sous tension le moniteur d’abord avant de mettre sous tension le PC ou l’équipement de lecture. Mise sous tension de l’interrupteur principal Mise sous/hors tension Appuyez sur la bouton POWER ( ) ou sur l’interrupteur d’alimentation pour mettre sous/hors tension. Pour mettre le moniteur hors tension, maintenez le bouton POWER ( ) enfoncé pendant 2 secondes environ.
Caractéristiques Modèle Alimentation Température de fonctionnement Hygrométrie de fonctionnement Consommation électrique Dimensions (à l’exclusion des éléments qui dépassent) Poids PN-K322B CA 100 V - 240 V, 50/60 Hz (en utilisant l’adaptateur secteur fourni) 5°C à 35°C 20 % à 80 % (sans condensation) 97 W * (en utilisant l’adaptateur secteur fourni) (mm) Moniteur uniquement Environ 750 (L) x 36 (P) x 441 (H) Moniteur sur le support fourni • Angle de l’écran du moniteur : 90° (par rapport à l’horizonta
[ESPAÑOL] Índice INFORMACIÓN IMPORTANTE..........................................1 ESTIMADO CLIENTE DE SHARP.....................................1 PRECAUCIONES DE SEGURIDAD..................................2 INSTRUCCIONES DE SEGURIDAD.................................3 PRECAUCIONES DE MONTAJE.......................................4 Componentes suministrados..........................................5 Ajuste de la posición del monitor...................................5 Conexiones............................
PRECAUCIONES DE SEGURIDAD La electricidad se emplea para muchas funciones útiles pero también puede causar lesiones personales y daños en la propiedad si se manipula de forma inadecuada. Este producto se ha diseñado y fabricado poniendo el máximo énfasis en la seguridad. No obstante, el uso inadecuado podría tener como resultado descargas eléctricas y/o incendios. Para evitar peligros potenciales, observe las siguientes instrucciones cuando instale, utilice y limpie el producto.
PRECAUCIONES DE SEGURIDAD (Continuación) ADVERTENCIA: Éste es un producto de clase A. En un entorno doméstico, este producto puede causar interferencias de radio, en cuyo caso el usuario deberá adoptar las medidas adecuadas para solucionar el problema. Para cumplir la normativa sobre compatibilidad electromagnética (EMC), utilice cables blindados para conectar los siguientes terminales: Terminal de entrada HDMI y terminal de entrada DisplayPort.
PRECAUCIONES DE MONTAJE • Este producto es para uso en interiores. • Se requiere un soporte de montaje en conformidad con las especificaciones VESA. • Para instalar el monitor sobre un soporte (de venta en comercios) o en la pared, o para quitarlo o moverlo, consulte con el proveedor. • El montaje mural del monitor requiere un soporte especial y el trabajo deberá ser efectuado por un distribuidor autorizado de SHARP. Nunca deberá intentar realizar este trabajo usted mismo.
Componentes suministrados Si falta algún componente, póngase en contacto con su distribuidor.
Conexiones Precaución • Asegúrese de apagar el interruptor primario y desconectar el enchufe de la toma de corriente antes de conectar/desconectar los cables. Asimismo, lea el manual del equipo que desea conectar. • Tenga cuidado de no confundir el terminal de entrada con el terminal de salida al conectar los cables. La inversión accidental de los cables conectados a los terminales de entrada y salida podría causar malfuncionamientos y otros problemas.
Encendido/apagado Precaución • Encienda el monitor antes de encender el PC o el dispositivo de reproducción. Encendido de la alimentación principal Encendido/apagado Pulse el botón de encendido ( ) para encender o apagar el aparato. Para apagar el aparato, pulse y mantenga pulsado el botón de encendido ( ) durante aproximadamente 2 segundos.
Especificaciones Modelo Requisitos de alimentación Temperatura de funcionamiento Humedad de funcionamiento Consumo de energía Dimensiones (excluidas las protuberancias) Peso PN-K322B 100 V - 240 V ca, 50/60 Hz (al usar el adaptador CA suministrado) 5°C a 35°C 20% al 80% (sin condensación) 97 W * (al usar el adaptador CA suministrado) (mm) Monitor solo Aprox. 750 (An) x 36 (Pr) x 441 (Al) Monitor sobre soporte suministrado • Ángulo de pantalla del monitor 90º (de la horizontal) Aprox.
Printed in China Imprimé en Chine Impreso en China 13F KS1 TINSEXXXXMPZZ(1)