PN-L802B PN-L702B PN-L602B LCD MONITOR TOUCH PANEL DRIVER OPERATION MANUAL Version 2.
Contents Setting up the PC..............................................................3 Installing the touch panel driver....................................3 Touch Panel Settings........................................................4 How to configure settings..............................................4 Calibration.....................................................................5 Properties......................................................................6 Uninstalling the Driver Software....
Setting up the PC To use the touch panel, the touch panel driver must be installed from the supplied CD-ROM and the touch panel must be connected to your PC. Installing the touch panel driver The touch panel driver is a program that enables you to use the touch panel to operate the PC that is connected to the touch panel. Caution • This can only be done by a user with administrator authority.
Touch Panel Settings The touch panel driver starts automatically and the icon ( ) appears on the taskbar. Caution • When using the touch panel, set the “SIZE” of the monitor to “WIDE”, “NORMAL”, or “Dot by Dot”. The touch panel cannot be used when the “SIZE” is set to “ZOOM1” or “ZOOM2”. • In Windows 7, if the display screen size is set to “NORMAL” or “Dot by Dot”, the touch panel cannot be used in a portrait installation. How to configure settings 1. Click the touch panel driver icon ( 2.
Touch Panel Settings Calibration Calibration is used to perform position alignment so that the mouse cursor moves to the correct position when the screen is touched. Caution • Do not perform calibration in “Tablet PC Settings” in Control Panel. Calibration will not take place correctly. • When setting the “Simple” on PN-L802B, change the screen size to “Wide” and set the “Advanced” beforehand.
Touch Panel Settings Properties Settings for the touch action and the touch pen can be configured in the properties. Select a tab to change a setting on that tab. nDouble Click Range Setting (Single touch mode) Set how much the position can shift between the first touch and the second touch and still be recognized as a double-click. Set the range based on how you use the touch pen. To return the setting to the default setting, click “Default”.
Touch Panel Settings nOperation Setting Function Button 1 Set the function that activates when function button 1 is pressed with the touch pen. • RightClick : Functions as a right click. • Disable : Disables function button 1. Function Button 2 Set the function that activates when function button 2 is pressed with the touch pen. • Pen Software Link : Functions as a link button for a Pen Software function. • Disable : Disables function button 2.
Uninstalling the Driver Software Caution • This can only be done by a user with administrator authority. 1. Click the touch panel driver icon ( ) on the taskbar and click “Exit”. If a confirmation window appears, click “Yes”. 2. Disconnect the USB cable. 3. Select “Control Panel” from the “Start” menu. 4. Click “Uninstall a program”. • If you are using icon view (Classic View), double-click “Programs and Features”. • In Windows XP, click “Add or Remove Programs”.
PN-L802BL702BL602B D EN12G(3)
