Owner's Manual

- 30 -
Connecting hosts
• You can connect hosts on the same network to share screens and perform remote
operation.
• Due to remote access technology restrictions, if the OS of the host to be connected is
Windows 8, the OS of the host that will connect must also be Windows 8.
• Depending on the network environment, the amount of time for processing may increase.
Connecting to another host
1. On the Host menu, tap [Connect to Other].
For a lite version host, tap [Remote Meeting] on the launcher screen.
The connection selection screen appears.
2. Tap the host to connect to.
To manually specify the IP address of a host, tap [Manual Input] and enter the IP
address and name of the host.
3. Tap [Connect].
TIPS
• If you tap "Edit Host Information", you can enter or delete connection information.
Operations when connected
You can operate the connected host.
(1) (2) (3)
(1) Minimize
Minimizes the screen.
(2) Acquire Control/Release Control
Tap [Acquire Control] when obtaining remote operation permission for the connected
host.
When you obtain operation permission, you can operate the screen displayed on the
connected host.
Tap [Release Control] to release the obtained operation permission.
(3) Exit
Ends the connection with the host.
TIPS
• To operate the Pen Software on the connected device, in the Pen Software settings, set
“PenDrawing”to“Bothtouchpenandnger”andclearthe“Useautoswitching”check
box.
• For Pen Software version 3.0, in the Pen Software settings, set the “Touch Pen” setting
to “Other”.