Owner's Manual
Table Of Contents
- Introduction
- Required Operating Environment
- Starting and Exiting the Software
- Layout of Basic Screen
- Saving and Sending a File by E-mail
- Opening Files
- Edit Operations
- Adding a board / changing the board to be edited
- Changing the sheet to edit
- Drawing with a Pen
- Erasing a drawn line
- Drawing shapes
- Drawing straight lines or arrows
- Drawing a shape with the figure pen
- Inputting text
- Searching for text and handwritten characters in the board
- Importing and pasting an image
- Editing an object
- Undo/redo operation
- Enlarging the view of the screen
- Using multiple touch pens simultaneously
- Launching an External Application (Full version only)
- Searching the Internet (Full version only)
- Importing a Document as an Image (Pen Software Printer Driver) (Full version only)
- Acquiring an Image From a Multifunction Machine
- Acquiring an image from a TWAIN device (Full version only)
- Linking to Microsoft PowerPoint (Full version only)
- Printing
- Using a Secondary Display (Full version only)
- Customizing the Settings
- Installing/Uninstalling the Software (Full version only)
- Intellectual Property Rights and Other Matters that Apply to This Software
46
E
Using a Secondary Display (Full version only)
Applicable models (as of September 2014)
PN-L series ( PN-L602B/PN-L603A/PN-60TA3/PN-L603B/PN-60TB3/PN-L702B/PN-L703A/PN-70TA3/PN-L703B/PN-70TB3)
LL-S series (LL-S201A/LL-S242A)
LL-P series (LL-P202V)
The models that will become successively compatible (Schedule not xed yet) are as below
PN-L802B
Available models differ according to region.
Caution
• This feature is not compatible with Windows Vista.
• Set the screen resolution to 1920 x 1080.
• PN-L602B/PN-L702B/PN-L802B:
Set “Touch Mode Setting” of the touch panel driver to “Dual”.
PN-L603A/PN-60TA3/PN-L703A/PN-70TA3/PN-L603B/PN-60TB3/PN-L703B/PN-70TB3:
Set “Touch Operation Mode” of the touch panel settings tool to “Multi-Touch Mode”.
• The software keyboard for text entry may not appear in the display that shows Pen Software. In Windows 7, the software
keyboard cannot be displayed in a secondary display.
• An external application (page 39) launched from the pen software may appear in the primary display.
n
Secondary display settings
To use the touch panel in the secondary display, touch panel settings must be congured.
1. Connect the display to the external display port on the computer, and connect to the display with a USB cable.
2. Select “Hardware and Sound” from Control Panel.
3. Select “Tablet PC Settings”.
4. Select “Setup”.
5. Press the [Enter] key until the screen below is shown as the secondary display.
If the pen or touch input selection screen appears, select touch input.
6. Touch the screen.
7. Press “OK”.
“Tablet PC Settings” closes.