Quick Guide
6
E
Connections
Caution
• Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/disconnecting
cables. Also, read the manual of the equipment to be connected.
• Be careful not to confuse the input terminal with the output terminal when connecting cables. Accidentally reversing cables
connected to the input and output terminals may cause malfunctions and the other problems.
TIPS
• Set the audio input terminal to be used in each input mode in AUDIO SELECT on the SETUP menu. The factory settings are
shown below.
Input mode Audio input terminal (Factory setting)
D-SUB1 Audio1 input terminal
D-SUB2 Audio2 input terminal
DisplayPort DisplayPort input terminal
HDMI1 HDMI 1 input terminal
HDMI2 HDMI 2 input terminal
HDMI3 HDMI 3 input terminal
WHITEBOARD WHITEBOARD
• To use the touch panel with a computer connected to the monitor, the touch panel and computer must be connected, and
Touch Panel Settings Tool, Touch Pen Utility, and Pen Software must be installed on the computer from the provided CD-
ROM.
To install the software, see the manual for each.
• To use a touch panel with a computer connected to the bottom, connect to the USB1 port.
To use a touch panel with a computer connected to the side, connect to the USB2 port.
(Factory setting. Can be changed in INPUT SELECT in the SETUP menu.)
• HDMI, the HDMI logo and High-Denition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing
LLC.
• DisplayPort is a registered trademark of Video Electronics Standards Association.
1
For power outlet
234567 8910 11
17
18
12
13
14
15
16
1. AC input terminal
2. External speaker terminals
3. Audio output terminal
4. DisplayPort output terminal
5. Touch pen adapter port
6. USB 1 port
7. LAN terminal
8. D-sub 1 input terminal
9. DisplayPort input terminal
10. HDMI 1 input terminal
11. Audio 1 input terminal
12. USB 2 port
13. D-sub 2 input terminal
14. HDMI 2 input terminal
15. HDMI 3 input terminal
16. Audio 2 input terminal
WHITEBOARD mode terminals
17. USB ports
18. LAN terminal