LCD MONITOR TOUCH PANEL SETTINGS TOOL OPERATION MANUAL Applicable models (as of December 2015) PN-60TA3/PN-60TB3/PN-60TW3/PN-70TA3/PN-70TB3/PN-70TW3/PN-80TC3/ PN-L603A/PN-L603B/PN-L603W/PN-L703A/PN-L703B/PN-L703W/PN-L803C (Available models differ according to region.) Version 2.
Contents Introduction.......................................................................3 System Requirements...................................................3 Setting up the PC..............................................................4 Install.............................................................................4 Touch Panel Settings........................................................5 How to configure settings..............................................5 Calibration.................
Introduction This software is used to configure touch action settings in order to perform touch action on a computer connected to the video input terminal of an applicable model. To perform touch action on a computer connected to an applicable model, this software must be installed on the computer. System Requirements OS Windows 7 (32-bit or 64-bit version), Windows 8 (32-bit or 64-bit version), Windows 8.
Setting up the PC Install Caution • This can only be done by a user with administrator authority. • If an older version of the Touch Panel Settings Tool is installed, remove (uninstall) the old version before installing the Touch Panel Settings Tool. (See page 8.) • Do not touch the touch panel when connecting the USB cable. If you touch the touch panel, it will lead to a malfunction. In this case, disconnect and then reconnect the USB cable. 1. Start your PC. 2. Exit all applications that are running. 3.
Touch Panel Settings The Touch Panel Settings Tool starts automatically. An icon ( ) appears on the taskbar. Caution • When using the touch panel, set the “SIZE” of the monitor to “WIDE”, “NORMAL”, or “Dot by Dot”. The touch panel cannot be used when the “SIZE” is set to “ZOOM1” or “ZOOM2”. How to configure settings 1. Click the Touch Panel Settings Tool icon ( 2. Click a menu to change a setting.
Touch Panel Settings Calibration If the touch position is out of place, perform position alignment. Adjust Calibration can be performed. Follow the on-screen instructions. Reset The calibration settings will be deleted. Properties Settings for the touch action can be configured. nDouble Click Range Setting (Mouse Mode) Set how much the position can shift between the first touch and the second touch and still be recognized as a double-click.
Touch Panel Settings nRight-click Setting (Mouse Mode) Recognize press and hold as right click Set whether touching the screen continuously is used as a mouse right-click. Press and Hold Duration Set the time that is recognized as a mouse right-click. Press and Hold Effective Range Set the effective range for determination that the screen is being touched continuously. nOperation Setting Touch Operation Mode Select the touch mode (Mouse Mode or Multi-Touch Mode).
Uninstall Caution • This can only be done by a user with administrator authority. 1. Click the Touch Panel Settings Tool icon ( ) on the taskbar and click “Exit”. • If a confirmation window appears, click “Yes”. 2. Disconnect the USB cable. 3. Select “Control Panel” from the “Start” menu. 4. Click “Uninstall a program”. • If you are using icon view, click “Programs and Features”. 5. Select “SHARP Touch Panel Settings Tool” and click “Uninstall”. • Follow the on-screen instructions.
TS V2.
