User Manual

49
E
(4) Dual-Touch Gesture
Setwhetherdualtouchisenabled.Whenenabled,thefollowingactionsarepossible:
• “Zoom”canbeusedtochangethesheetdisplaymagnication,andtwo-ngerdragcanbeusedtochangethedisplay
position.(Page38)
• Two-ngerleft/rightdragcanbeusedtochangethesheet.(Page21)
TIPS
• DualtouchcannotbeusedinWindowsVista.
• WhenusingaPN-Lseries(excludingthePN-L603A/PN-60TA3/PN-L603B/PN-60TB3/PN-L603W/PN-60TW3/PN-L703A/
PN-70TA3/PN-L703B/PN-70TB3/PN-L703W/PN-70TW3/PN-L803C/PN-80TC3),set“TouchModeSetting”ofthetouch
paneldriverto“Dual”,and“InputModeSetting”to“Standard”or“HandWrite”.
WhenusingthePN-L603A/PN-60TA3/PN-L603B/PN-60TB3/PN-L603W/PN-60TW3/PN-L703A/PN-70TA3/PN-L703B/
PN-70TB3/PN-L703W/PN-70TW3/PN-L803C/PN-80TC3,set“TouchOperationMode”oftheTouchPanelSettingsToolto
“Multi-TouchMode”,and“Inputmode”oftheTouchPenUtility*to“Standard”.
*Thisisrequiredwhenusing3buttonpen(soldseparately)withthePN-L603B/PN-60TB3/PN-L703B/PN-70TB3.
• Dualtouchmaynotoperatecorrectlyinthefollowingcases:
Touchingistooquick.
Thedistancebetweenthe2pointsistooshort.
The2pointsintersect.
Thepointsarealignedhorizontallyorvertically.
(5) Simultaneous Drawing with Multiple Fingers
Setto“Enable”whendrawingwithmultiplengers.
Tousethisfunction,set“Dual-TouchGesture”to“Disable”and“TouchPen”to“FingerorOtherPen”.(Page48)
(6) Automatically Find Eraser
Whensetto“On”,thepenautomaticallychangetotheeraserwhenthescreenistouchedwiththeeraserinpenmode.(Page
26)
ThiscannotbeselectedifamodelthatcanusethisfunctionisnotconnectedwhenthePenSoftwareislaunched.
TIPS
• TousethisfunctionwiththePN-Lseries(excludingthePN-L603A/PN-60TA3/PN-L603B/PN-60TB3/PN-L603W/PN-60TW3/
PN-L703A/PN-70TA3/PN-L703B/PN-70TB3/PN-L703W/PN-70TW3/PN-L803C/PN-80TC3),set“InputModeSetting”to
“Standard”inthetouchpaneldriver.
WhenusingthePN-L603A/PN-60TA3/PN-L603B/PN-60TB3/PN-L603W/PN-60TW3/PN-L703A/PN-70TA3/PN-L703B/
PN-70TB3/PN-L703W/PN-70TW3/PN-L803C/PN-80TC3,set“Inputmode”oftheTouchPenUtility*to“Standard”.
Ifsettootherthan“Standard”,theeraserautorecognitionfunctioncannotbeused.
*Thisisrequiredwhenusing3buttonpen(soldseparately)withthePN-L603B/PN-60TB3/PN-L703B/PN-70TB3.
(7) Restore Default Settings
Resetthesettingstotheinitialvalues.
TIPS
• Thelanguagesettingwillnotreturntothedefaultsetting(page54).