User Manual

29
E
SNMP Setup SNMP V3
Enable / Disable
Set whether SNMP is enabled or disabled.
Username
Set the user name for SNMP.
Auth Password (MD5) / Priv Password (DES)
Set each password.
Trap Destination
Set the trap destination.
OSD Setup Display
Option
Device Information / User-List / Connect info
Set whether each type of information is shown in the screen.
Font color / Font Size
Set the color and size of the screen font.
Screen Saver Settings
Set whether a screen saver is used.
If used, set the time until the screen saver activates.
Projection
Option
OSD Menu Button
Set whether the toolbar is displayed.
WebSlides
Setup
Auto Refresh
Interval
(second)
Set the refresh interval for the screen displayed in the web browser.
Access
Password
Control
Set the password for display of the screen in a web browser.
Disable: Do not use a password.
Use the same password as ”Code”: Use the same password as the passcode.
Use the following Code: Use the entered number as the password.
Change
Passwords
Conference
Control
Change the password for Conference Control.
Admin Change the password for Admin.
Reset to Default Return the wireless controller settings to their factory default state.
Firmware
Upgrade
System
Conguration
Export: You can save the settings.
Import: You can retrieve saved settings.
Firmware
Upgrade
Update the rmware of the wireless controller.
Reboot System Restart the wireless controller.