Owner's Manual

- 25 -
Transferring files between clients
Sending-side operation
TIPS
• Donotsendlesfrommultipledevicesatthesametime.Dependingonthenetwork
environment, this may not work correctly.
 Android device/iOS device
1. On the sending-side client, tap [Send File].
2. Tap [Open menu] on the right of the screen.
3. Select the le to send. (page 20)
You cannot send an adjusted image file.
4. Tap [Open menu] - [Send to Other Users].
Clients in the standby to receive state are displayed in a list.
5. Tap the destination.
6. Tap [OK].
7. Tap [Yes].
 Windows device
1. On the main screen on the sending-side client, tap [File] - [Send to Other Users].
2. Select the le to send.
Clients in the standby to receive state are displayed in a list.
3. Tap the destination.
4. Tap [Send].
You can transfer files between clients without them being connected to the host.
First set the client that will receive the file to the standby to receive state, and then send the
file from the other client. (Recommended file size: 10MB or less)
Receiving-side operation
 Android device/iOS device
1. On the receiving-side client, tap [Received Files].
2. Tap [Open menu] on the right of the screen.
3. Tap [Receive from Others].
The client enters the standby to receive state.
When a file is received, you are notified of that on the screen. You can view the received file
in the received folder. (page 26)
Tap [Cancel] to end the standby to receive state.
 Windows device
1. On the main screen on the receiving-side client, tap [File].
2. Tap [Receive from Other Users].
The client enters the standby to receive state.
When a file is received, you are notified of that on the screen. You can view the received file
in the received folder. (page 26)
Tap [Cancel] to end the standby to receive state.