Owner's Manual

- 3 -
Touch Display Link is software that allows you to send and receive files between a monitor
and a mobile device such as a tablet device and to share and operate a screen on a Wi-Fi
network.
• You can operate and write to the screen of a monitor from a mobile device.
• You can capture and handwrite memos on the screen of a monitor with a mobile device.
• You can transfer files between a monitor and a mobile device.
• You can transfer files between mobile devices.
• You can share the screen of a monitor in a remote location. (This software is additionally
required by the connected devices.)
Important Information
• This software has been shipped after strict quality control and product inspection. If,
however, you find any failure or malfunction, contact your product dealer.
• Please understand that SHARP CORPORATION bears no responsibility for errors made
during use by the customer or a third party, nor for any other malfunctions or damage to
this software arising during use, except where indemnity liability is recognized under law.
• Transcribing or duplicating part or all of this manual and/or this software without permission
from our company is not permitted.
• As a part of our policy of continuous improvement, SHARP reserves the right to make
design and specification changes for product improvement without prior notice.
• File names and numbers of characters that can be handled by this software comply with
the specifications of Windows, Android, and iOS.
Notation Conventions
• Keystrokes are indicated with square brackets.
E.g. [Home] key, [Back] key, etc.
• Menus, windows, dialog boxes, buttons, and tabs etc are indicated with square brackets.
E.g. 1. Tap the [Show host menu tag] on the desktop.
The Host menu appears.
• Items, check boxes, and option buttons, etc., are indicated with quotation marks.
E.g. “Detect Paper”, “Verify by connection ID”, etc.
• This manual assumes that Touch Display Link has been installed in the following location.
If you have installed Touch Display Link in a different location, this can be interpreted to
refer to the folder where you installed it.
C:\Program Files\SHARP\Touch Display Link (default)
• The screenshots and operational procedures in this manual are only examples.
These may change depending on your monitor, screen settings, or the version of the OS
you are using and other factors.
• This manual does not contain basic operating manuals for Windows, Android, and iOS.
• In this manual, the terms “microSD memory card” and “microSDHC memory card” are
shortened to “SD card”.
• The following devices are referred to as the "host" in this manual.
- A computer that is connected to a applicable monitor and that has this software installed
on it (When differentiating between this host and the below host, this host is referred to
as the "full version host".)
- A monitor with this software preinstalled on it
(When differentiating between this host and the above host, this host is referred to as the
"lite version host".)
• The following mobile devices are referred to as the "client" in this manual.
- Android devices, iOS devices, and Windows devices with this software (client version)
installed on it
• In this manual, the operation to select a menu or other item on the screen is called a "tap".
When using the mouse on a Windows computer, please left click.
• In this manual, “Windows 8” refers to both Windows 8 and Windows 8.1.
Introduction