LCD MONITOR TOUCH PANEL DRIVER OPERATION MANUAL Applicable models PN-L802B/PN-L702B/PN-L602B for Mac Version 1.
Contents Introduction.......................................................................3 System Requirements...................................................3 Setting up the Computer..................................................4 Installing the touch panel driver....................................4 Touch Panel Settings........................................................5 How to configure settings..............................................5 Calibration......................................
Introduction System Requirements To use the touch panel, the touch panel must be connected to a computer, and the touch panel driver must be installed on the computer. OS Mac OS X v10.6, Mac OS X v10.7 CPU Intel processor Memory At least 2 GB Free space on hard drive At least 5 MB TIPS • Depending on the application software, touch operation may not be possible (for example, if the application processes mouse and other operations independently).
Setting up the Computer To use the touch panel, the touch panel driver must be installed and the touch panel must be connected to your computer. Installing the touch panel driver The touch panel driver is a program that enables you to use the touch panel to operate the computer that is connected to the touch panel. Caution • To install, an administrator name (user name) and password are required.
Touch Panel Settings The touch panel driver starts automatically and the icon ( ) appears on the menu bar. Caution • When using the touch panel, set the “SIZE” of the monitor to “WIDE”, “NORMAL”, or “Dot by Dot”. The touch panel cannot be used when the “SIZE” is set to “ZOOM1” or “ZOOM2”. How to configure settings nConfiguring settings from the menu bar 1. Click the touch panel driver icon ( 2. Click a menu to change a setting. ) on the menu bar.
Touch Panel Settings Calibration Calibration is used to perform position alignment so that the mouse cursor moves to the correct position when the screen is touched. Caution • When setting the “Simple” on PN-L802B, change the screen size to “Wide” and set the “Advanced” beforehand. When the screen size is “NORMAL” or “Dot by Dot” and the “Advanced” is set before the “Simple”, the mouse cursor may be out of position.
Touch Panel Settings Properties Settings for the touch action and the touch pen can be configured in the properties. nDouble Click Range Set how much the position can shift between the first touch and the second touch and still be recognized as a double-click. To return the setting to the default setting, click “Default”. nDouble Click Speed Set the time that is recognized as a double-click. When a second touch occurs within the set time after the first touch, it is recognized as a double-click.
Touch Panel Settings nOperation Settings Function Button 1 (Black) Set the function that activates when function button 1 is pressed with the touch pen. • RightClick : Functions as a right click. • Disable : Disables function button 1. Input Mode Setting Set the input mode for the touch panel. It is normally recommended that you use “Standard”. • Standard : Automatically switches between pen mode and handwriting mode.
Uninstalling the Driver Software Caution • To uninstall, an administrator name (user name) and password are required. 1. Disconnect the USB cable. 2. Execute uninstall. (1) Double-click the “TouchPanelDriver” folder. (2) Double-click “TouchPanelDriver Uninstaller.app”. (3) Click “Uninstall”. • If a screen prompting you to enter the name and password appears, enter the name and password of the administrator and click “OK”. 3. When the uninstall finished screen appears, click “Quit”.
Touch Action When the touch panel is touched with the pen, the input mode changes to pen mode. When touched with your finger, the input mode changes to handwriting mode. The input mode is set by default to change automatically (Standard mode). TIPS • Also read the manual for the monitor. • Select the action to be used in Function Setting. (See page 8.) nCommon finger and pen actions Tap Same action as left-clicking a mouse. Touch with your finger/pen.
Touch Action Two Finger Pinch Use in a screen that is capable of reduction/enlargement. Touch the screen with two fingers and move your fingers closer together to reduce the view, or apart to enlarge the view. nPen actions Function Button 2 Pen tip Ultrasonic transmitter Battery indicator Function Button 1 Function Button 1 Pressing Function Button 1 has the same action as rightclicking a mouse. The battery indicator illuminates. Reduction Function Button 2 This button is not used for Mac.
PN-L802BL702BL602B DM EN12C(1)