Quick Guide

ENGLISH

Afxing the Protection Covers

After installing the monitor, afx the protection covers (4

pieces) as necessary.

Protection

cover

Protection cover

Binding Cables

: Cable clamp attachment

The cables connected to the terminals on the rear of the

monitor can be fastened with the cable clamps.

Insert the cable clamp into the cable clamp attachment on the

rear of the monitor and fasten the cables.

Cable clamp

Cable

Cable clamp

attachment

Removing the Handles

The handles can be removed.

The removed handles can be attached on the side.

1. Remove the handle screws and remove the handles and

handle spacers.

2. Pass the handle screws through the handles and handle

spacers in order and secure.

Caution

• The handles, handle screws and handle spacers are for

this monitor. Do not use them for any other devices.

• When attaching the handles, always use this monitor’s

handles, handle spacers, and handle screws.

• Be sure the handles are attached securely.

TIPS

• To lower the height of the handles, attach the handles with

the handle spacers removed. To attach the handles with

the handle spacers removed, secure the handles with the

included handle screws (short).

Handle

Handle screws

Handle spacers