Operating instructions

41
E
The Power LED is ashing in red and green alternately.
• Whentheinternaltemperatureofthemonitorrises
excessively, the brightness of the backlight decreases
automaticallyinordertopreventhigh-temperature-related
problems.Whenthisoccurs,thePowerLEDashesred
and green alternately.
• Iftheinternaltemperaturerisesfurther,themonitor
automaticallyentersstandbymode.(ThePowerLED
continuesashingredandgreenalternately.)
• Removethecauseoftheexcessivetemperaturerise.
-Ifthemonitorentersstandbymodeduetoarisein
temperature, to return to normal display, turn the power
switch off and then back on again. The monitor, however,
will enter standby mode again if the cause of the
temperature rise is not eliminated. (See page 8.)
-Checkwhetherthemonitorisplacedatalocationwhere
a quick rise in temperature is likely. Internal temperature
rises quickly if the vents on the monitor are blocked.
-Internaltemperaturerisesquicklyifdustaccumulates
insidethemonitororaroundthevents.Removedustif
possible.AskSHARPdealeraboutremovinginternaldust.
Troubleshooting