Operating instructions

39
E
Command-based control
YoucancontrolthemonitorusingRS-232Ccommands
(see page 36) via terminal software and other appropriate
applications.
Readthemanualfortheterminalsoftwarefordetailed
instructions.
(1) Connect the PC to the monitor.
1. SpecifytheIPaddressanddataportnumber(xedat
“10008”), and connect the PC to the monitor.
When connection has been established successfully,
[
Login:]isreturnedasresponse.
2. Entertheusernameandpassword.
(The default settings are blank.)
(2) Send commands to control the monitor.
• ThecommandsusedarethesameasthoseforRS-
232C.Refertothecommunicationprocedure(see
page32)foroperation.
• UsablecommandsareprovidedintheRS-232C
command table (see page 36).
(3) Disconnect the connection with the monitor and
quit the function.
1. Send[BYE ].
Whenthetransmissionissuccessful,[goodbye]is
returned and the connection is disconnected.
TIPS
• Theconnectionisautomaticallydisconnectedifthereisno
communication for about 5 minutes.
Controlling the Monitor with a PC (LAN)