4K BIG PAD Application Guide 【Wireless Casting】 Product: PN-65HC1 PN-75HC1 PN-86HC1 PN-70HC1E Ver. 1.5 for Firmware Ver. 1.60 (PN-86/75/65HC1) Ver. 1.
Introduction 【About EShare】 The screen can be shared and displayed mutually between the BIG PAD and the device. The BIG PAD and the device to be connected must be connected to the same network. *Connection to all devices is not guaranteed. *A router or access point is required. 【Supported devices】 device type OS supported version PC Windows Windows 8.1/10/11 Chrome OS EShare: Chrome OS version 87 or later Google Cast: Chrome OS version 92 or later macOS macOS 10.
Preparation (BIG PAD) 【BIG PAD】 First, connect to a wireless network. 5. Enable “Wireless LAN” and connect to the access point. Press the INPUT button on the remote control or the bottom of the BIG PAD to change the input mode to APPLICATION and display the home screen. 1. Connect the supplied wireless adapter to the USB port on the rear panel as shown below. 2. On the BIG PAD, select “Apps” on home screen in APPLICATION mode. 3.Select “Settings”.
Preparation (Windows/Chrome OS) 【Windows PC】 ■Configure the wireless LAN connection settings of the PC (The following screens are on windows 10 1903) Turn on the wireless LAN 【Chrome OS PC】 *To wirelessly connect the Chrome PC to the BIG PAD, you will need to connect to the internet for the first time. ■Configure the wireless LAN connection settings of the PC (The following screens are on Chrome OS version 88) Connect to an access point on the same network as the BIG PAD ■ Install “EShare for SH”.
Preparation (macOS) 【macOS PC】 ■Configure the wireless LAN connection settings of the PC (The following screens are on macOS v10.15) Turn on the wireless LAN ■Touch back To enable the function of receiving touches to the BIG PAD as touches to the device while the device is transmitting the screen, you need to change the setting. 1. Click “System Preferences”. Connect to an access point on the same network as the BIG PAD 2. Select “Security & Privacy”. ■Install “EShare for SH”. (First time only) 1.
Preparation (Android/iOS,iPadOS) 【Android device】 ■ Configure the wireless LAN connection settings of the device (The following screens are on Android 9) Press and hold to open Wi-Fi setting screen 【iOS/iPadOS device】 *To wirelessly connect the iOS/iPadOS device to the BIG PAD, you will need to connect to the internet for the first time.
Wireless Connection (Windows) 【Windows PC】 ■ Operate “EShare for SH” on the Windows PC 1.Click “Eshare for SH” 2.Select the BIG PAD you want to send and receive screen from the device list. 3. To display the screen of your PC on the BIG PAD, select “Share Screen”. Select “Stop Sharing” to stop screen sharing. 4.To display the BIG PAD screen on your PC, select “Screen Mirror”. The BIG PAD screen will appear on your PC. Click the “×” in the upper right corner of the windows to stop screen mirroring.
Wireless Connection (Chrome OS) 【Chrome OS PC】 【When using “EShare”】 ■ Operate “EShare for SH” on the Chrome OS PC 1.Open the launcher and Click “EShare for SH”. 【When using Google Cast】 ■ Operate the Chrome OS PC 1. 2.Select “Connect” 3. To display the screen of your PC on the BIG PAD, select “Share Screen”. Click the screen you want to display, and select “share”. 4. To display the BIG PAD screen on your PC, select “TV Mirror”. Click the bottom right corner of the desktop and click “Cast”.
Wireless Connection (macOS) 【macOS PC】 ■ Operate “EShare for SH” on the macOS PC 1.Click “Eshare for SH” ■When the following message is displayed, please refer to page 4 to enable touchback. If you do not want to use touchback, you do not need to enable it. 2.Select the BIG PAD you want to send and receive screen from the device list. 3. To display the screen of your PC on the BIG PAD, select “Share Screen”. Select “Stop Sharing” to stop screen sharing. 4.
Wireless Connection (Android) 【Android device】 ■Operate “EShare for SH” on the Android device 1.Open Application list, tap “EShare for SH” 5. If you want to use the wireless camera/microphone function, select “Camera”. quit camera function microphone ON/OFF mobile light ON/OFF switch between in/out camera shutter button 2. If a message appears asking for permission, follow the on-screen instructions to allow it. Press the shutter button to take a still image, which will remain on the BIG PAD screen.
Wireless Connection (iOS/iPadOS) 【iOS/iPadOS device】 ■Operate “EShare for SH” on the iOS/iPadOS device 1. Tap “EShare fo SH”. 6. If you want to use the wireless camera/microphone function, select “Camera”. quit camera function Press the shutter button to take a still image, which will remain on the BIG PAD screen. The captured still image will be saved as an image file on the device. 2.Select the BIG PAD you want to send and receive screen from the device list. microphone ON/OFF mobile light ON/OFF 3.
Wireless Connection (Other functions) ■Change the settings of EShareServer On the BIG PAD, touch in the lower right corner of the EShareServer screen to display the setting screen. □ Change the device name of BIG PAD You can change the device name of the BIG PAD. □ Setting PIN code When the PIN code setting is turned ON, the PIN code must be entered when executing “Share Screen” or “Screen Mirror” on the device. This setting can be used to limit the devices that can be connected to the BIG PAD.
Wireless Connection (appendix) ■Support for Wireless Sharing capability for OS updates -Due to frequent updates in the supported client operating systems, SHARP cannot always guarantee a fully functional wireless sharing capability. ■About "EShare for SH" app for Chrome OS and Android -Starting with firmware ver. 1.60, the EShare application for Android is now the same as that for Chrome OS, "EShare for SH". -With "EShare for SH," audio transmission during screen transmission is not possible.
SHARP CORPORATION