Operation Manual, Quick Start Guide

BEFORE USING THE MACHINE

PLACING ORIGINALS

The automatic document feeder can be used to automatically scan many originals at once, and this saves you the

trouble of manually feeding each original.

For originals that cannot be scanned using the automatic document feeder, such as a book or a document with notes

attached, use the document glass.

USING THE AUTOMATIC DOCUMENT FEEDER

When using the automatic document feeder, place the originals in the document feeder tray.

Make sure an original has not been placed on the document glass.

USING THE DOCUMENT GLASS

Take care that your fingers are not pinched when closing the automatic document feeder.

After placing the original, be sure to close the automatic document feeder. If left open, parts outside of the original will be

copied black, causing excessive use of toner.

Set the orientation of the image to ensure that the orientation of the placed original is correctly recognized.

For details, see the User's Manual.

Adjust the original guides to

the width of the originals.

Place the originals face up with the edges aligned

evenly.

The indicator line indicates approximately

how many originals can be placed. The placed

originals must not be higher than this line.

Place the original face down.

Align the top left corner of the

original with the tip of the

mark in the far left corner of the

glass.

Place the original

face down.