RESU Salesbook

Sect. 2 Disassemble RESU10H (Type-R)
RESU10H pack voltage must remain above > 84V in orde
r to remain in operation or in the field.
3) Disassemble the power cable (plug-in connector) from the DC/DC converter
4) Determine if RESU has an AUX switch or applied Disconnect switch (breaker)
After disconnecting power cable, attach insulation tape on the power cable connector
to prevent shorting.
Caution
OR
AUX Switch Applied Disconnect Switch
Do Not Publish
- 33 / 37 -
7. Appendix
7.1 RESU Pack System Checks_RESU10H Type-R (HV)