PN-E471 PN-E421 LCD MONITOR OPERATION GUIDE
Contents Part Names........................................................................3 Basic Operation................................................................5 Menu Items........................................................................7 Displaying the menu screen..........................................7 List of menu items.........................................................8 Menu item details........................................................
Part Names nFront view 1. LCD panel 2. Remote control sensor 3. Input switch (See page 5.) 4. Power switch 5. Power LED 1 TIPS • Use a pointed object such as a pen tip to press the switches at the front of the monitor. 2 nRear view 3 4 5 12 1. 2. 3. 4. 5. 6. 7. 8. 9. 14 13 10 1 11 3 2 4 5 6 7 9 10. 11. When the PN-ZB01 (optional) is attached 15 8 16 17 18 19 20 21 23 24 22 Caution • Consult your SHARP dealer for attachment/detachment of optional parts.
Part Names nRemote control unit 1 6 2 3 4 5 E 4 7 8 9 1. 2. 3. 4. 5. 6. 7. 8. 9. Signal transmitter POWER button DISPLAY button (See page 5.) MUTE button (See page 5.) VOL +/- buttons (See page 5.) BRIGHT +/- buttons (See page 5.) Cursor control ( / / / ) buttons INPUT button (See page 5.) MODE button (See page 5.) SIZE button (See page 5.) MENU button (See page 5.
Basic Operation 3. MODE (Color mode selection) Each time you press this button, the color mode changes in the following order: 1 STD (Standard) → VIVID → sRGB → STD... 3 2 6 • sRGB applies to PC input only. sRGB is international standard of color representation specified by IEC (International Electrotechnical Commission). Color conversion is made in taking account of liquid crystal’s characteristics and represents color tone close to its original image. 8 4.
Basic Operation nSwitching the screen size Even when the screen size is changed, the display may remain the same depending on the input signal. WIDE ZOOM 1 PC input Displays image so it fills the entire screen. AV input An image with a 4:3 aspect ratio is stretched to fill the entire screen. PC input An image with a 4:3 aspect ratio is enlarged to fill the entire screen without changing the aspect ratio. The edges of the image may be cut off.
Menu Items Displaying the menu screen TIPS Video and audio adjustment and settings of various functions are enabled. This section describes how to use the menu items. See pages 10 to 13 for details of each menu items. Caution • Do not turn the main power switch off while the menu items are being displayed. Doing so may initialize the settings. • The menu will differ depending on the input mode. • The menu screen will close automatically if no operation is performed for about 15 seconds.
Menu Items List of menu items The displayed menu items vary depending on whether or not the PN-ZB01 (optional) is attached. ○: Item is available, -: Item is not available. Menu SCREEN PICTURE AUDIO SETUP E 8 Item AUTO CLOCK PHASE H-POS V-POS H-SIZE V-SIZE H-RESOLUTION V-RESOLUTION RESET AUTO CONTRAST BLACK LEVEL TINT COLORS SHARPNESS ADVANCED FLESH TONE 3D-NR MPEG-NR 3D-Y/C C.M.S.-HUE C.M.S.-SATURATION C.M.S.
Menu Items Menu OPTION Item DATE/TIME SETTING SCHEDULE INPUT SELECT AUDIO SELECT INPUT SIGNAL ENLARGE PIP/PbyP SCAN MODE POWER MANAGEMENT COLOR SYSTEM AUDIO OUTPUT AUDIO INPUT LEVEL SELF ADJUST AUTO INPUT CHANGE ENLARGE H ENLARGE V ENLARGE-POS H ENLARGE-POS V BEZEL H BEZEL V H-POS V-POS PIP MODES PIP SIZE PIP H-POS PIP V-POS PIP BLEND PIP SOURCE SOUND CHANGE MAIN POS PbyP2 POS AUTO OFF DVI BNC HDMI PC DVI-D PC HDMI PC D-SUB PC RGB AV DVI-D AV HDMI AV COMPONENT AV S-VIDEO AV VIDEO 480 LINES 768 LINES
Menu Items Menu item details The menu will differ depending on the input mode. nSCREEN AUTO (PC D-SUB/PC RGB) The CLOCK, PHASE, H-POS, and V-POS are automatically adjusted. Pressing performs adjustment. Use this automatic adjustment when you use the PC D-sub input terminal or PC RGB input terminals to display a PC screen for the first time or when you change the setting of the PC. (See page 16.) CLOCK (PC D-SUB/PC RGB) Adjusts frequency for sampling clock for applicable video.
Menu Items nAUDIO TREBLE Adjusts the volume of treble-level sound. BASS Adjusts the volume of bass-level sound. BALANCE Adjusts the balance of the audio sound between right and left. RESET Resets the values of the AUDIO menu items to the factory preset values. Select “ON” and then press . nSETUP OSD H-POSITION Adjusts the horizontal display position of menu screen. OSD V-POSITION Adjusts the vertical display position of menu screen.
Menu Items nOPTION DATE/TIME SETTING or to select the date and Set the date and time. Press time, and press or to change the numerical values. Set the date in “Year/Month/Day” order. Set the time on a 24-hour basis. SCHEDULE (See page 15.) You can set the time to switch the monitor on and off. INPUT SELECT Select the input mode to be used in PC/AV DVI-D input terminal, PC/AV HDMI input terminal and PC RGB/AV component input terminals.
Menu Items nPIP/PbyP PIP MODES Sets the display method. OFF..........Displays one screen. PIP............Displays a sub screen inside a main screen. PbyP.........Displays a main screen and a sub screen in a line. PbyP2.......Displays a main screen which measures 1280 pixels in the longest direction and a sub screen in a line. PIP SIZE Sets the size of the sub screen in PIP mode. PIP H-POS Adjusts the horizontal position of the sub screen in PIP mode.
Menu Items nEnlarge TIPS • You can align several monitors and integrate them into a single large screen to display. • Up to five monitors can be aligned in both the horizontal and vertical directions. • Each monitor displays enlarged views of separated images. (Example) Horizontal direction: 2 monitors Vertical direction: 2 monitors Horizontal direction: 3 monitors Vertical direction: 2 monitors Setting procedure In the ENLARGE menu, set ENLARGE H/V and ENLARGE-POS H/V. (See page 12.) 1.
Menu Items nSCHEDULE Caution You can set the time to switch the monitor on and off. Set this function with “SCHEDULE” in the OPTION menu. (See page 12.) SCHEDULE No. PC D-SUB XXXX/XX/XX XXX XX:XX:XX POWER (2) (1) DAY OF THE WEEK (3) TIME (4) INPUT (5) • Do not switch off the main power after setting the SCHEDULE. • Specify the correct date and time. (See page 12.) SCHEDULE does not function unless the date and time are specified. • Check regularly that the set date and time are correct.
Menu Items nADVANCED items (AV input) (See page 10 for additional Menu item details.) FLESH TONE Adjust the hue control. 3D-NR Reduce the noise of playback images on video. Setting a higher level reduces more noise. However, it may cause blurring on an image. MPEG-NR Reduce block noise caused by digital compression. 3D-Y/C (AV VIDEO) Specify whether to perform 3-dimension Y/C separation. If dot interference or cross-color is occurring in fast-motion scenes, selecting “OFF” may improve the image quality. C.
Initialization (Reset)/Functional Restriction Setting (FUNCTION) You can return the settings to their factory-preset values and restrict operations. 1. After pressing for about 5 seconds, press , and in that order. FUNCTION , , 1/1 ALL RESET ADJUSTMENT LOCK RS-232C OSD DISPLAY OFF UNLOCKED ON LED ON TEMPERATURE ALERT LED STATUS ALERT POWER BUTTON CONTROLLER INPUT OFF MONITOR END…[MENU] 2. Select and set the items. ALL RESET Resets the settings to the factory default settings.
Controlling the Monitor with a PC (RS-232C) You can control this monitor from a PC via RS-232C (COM port) on the PC. You can also connect multiple monitors via a daisy chain by using a PC. By assigning ID numbers to each monitor (see page 19), you can make input mode selection/adjustment or can check the status of a specific monitor. Precautions when the PN-ZB01 (optional) is attached • To control the monitor via RS-232C, set RS-232C/LAN SELECT to RS-232C.
Controlling the Monitor with a PC (RS-232C) nResponse code format When a command has been executed correctly O K Return code (0DH, 0AH) A response is returned after a command is executed.
Controlling the Monitor with a PC (RS-232C) nCommands for ID control The command examples shown on this page assume the following connection and ID number set up. ID number: 1 ID number: 2 ID number: 3 ID number: 4 IDST.......... A monitor receiving this command sets its own ID number in the parameter field. Example: IDST0001 OK 001 ← The ID number of this monitor is set to 1. IDLK.........The parameter of this command sets the ID number of the monitor.
Controlling the Monitor with a PC (RS-232C) nRepeater control This system has a function to allow setting of multiple monitors connected in a daisy chain using a single command. This function is called repeater control. You can use Repeater control function without assigning ID numbers. [Example] Set 1 Set 2 Set 3 Set 4 Setting of the GAMMA user data nTo transfer the GAMMA user data Use the user data transfer commands (UGRW, UGGW and UGBW).
Controlling the Monitor with a PC (RS-232C) RS-232C command table How to read the command table Command: Command field (See page 18.) Direction: W When the “Parameter” is set in the parameter field (see page 18), the command functions as described under “Control/Response Contents”. R The returned value indicated under “Reply” can be obtained by setting “????”, “ ?” or “???+” (repeater control) in the parameter field (see page 18). Parameter: Parameter field (See page 18.
Controlling the Monitor with a PC (RS-232C) PICTURE menu Function Command Direction Auto AGIN W CONTRAST CONT WR Parameter Reply Control/Response contents 1 When the input mode is PC D-SUB, PC RGB. 0-60 BLACK LEVEL BLVL WR 0-60 0-60 0-127 on PC D-SUB, PC RGB.
Controlling the Monitor with a PC (RS-232C) SETUP menu Function Command Direction Parameter Reply Control/Response contents OSD H-POSITION OSDH WR 0-100 0-100 OSD V-POSITION OSDV WR 0-100 0-100 MONITOR (for PN-E421 only) STDR WR 0-1 0-1 0: LANDSCAPE, 1: PORTRAIT MONO WR 0-1 0-1 0: OFF, 1: ON LANGUAGE LANG WR 14 14 ENGLISH 1 1 DEUTSCH 2 2 FRANÇAIS 3 3 ITALIANO 4 4 ESPAÑOL 5 5 РУССКИЙ 6 6 PWOD STANDBY MODE WR 0 0 1-60 1-60 WR 0-1 0-1 0: STANDARD, 1:
Controlling the Monitor with a PC (RS-232C) OPTION menu Function Command Direction Date/time setting DATE WR AABBCCDDEE AABBCCDDEE AA: Year, BB: Month, CC: Day, DD: Time, EE: Minute ○ SCHEDULE SC01SC08 WR ABCDEFFGGH ABCDEFFGGH Schedule of a specified number A: Schedule 0= Not effective, 1 = Effective B: Power 0 = OFF, 1 = ON C: Day of the week 1 0 = Only once, 1 = Every week, 2 = Every day D: Day of the week 2 0 = Sunday, 1 = Monday through 6 = Saturday, 9 = Not exist E: Day of the week 3 0 =
Controlling the Monitor with a PC (RS-232C) ENLARGE menu (When the input mode is PC) Function Command Direction EMAG WR 0-4 EMHV WR 11-55 11-55 1 x 1 (OFF) to 5 x 5 (“m x n” is expressed as “mn”, where m and n are the numbers of monitors specified for the longest direction and the shortest direction respectively.
Controlling the Monitor with a PC (RS-232C) PIP/PbyP menu Function Command Direction PIP MODES MWIN WR 0-3 PIP SIZE MPSZ WR 1-12 PIP POS The longest direction MHPS The shortest direction MVPS PIP POS LD+SD BATCH W Parameter Reply 0-100 0-100 R MPOS W 0-100 0-100,0-100 R PIP BLEND MWBL WR PIP SOURCE MWIP WR 0-3 0: OFF, 1: PIP, 2: PbyP, 3: PbyP2 1-12 0-100 R W Control/Response contents Specify the position in MPOSxxxyyy format.
Controlling the Monitor with a PC (RS-232C) Others Function Command Direction SCREEN SIZE (PC) WIDE WR 1-5 1-5 1: WIDE, 2: NORMAL, 3: Dot by Dot, 4: ZOOM1, 5: ZOOM2 SCREEN SIZE (AV) WIDE WR 1-5 1-5 1: WIDE, 2: ZOOM1, 3: ZOOM2, 4: NORMAL, 5: Dot by Dot VOLUME VOLM WR 0-31 MUTE MUTE WR 0-1 MODEL INF1 R SERIAL NO INFORMATION SRNO R BRIGHT VLMP WR TEMPERATURE SENSOR DSTA R Parameter Reply Control/Response contents 0-31 0-1 0: OFF, 1: ON ○ ○ ○ *2 (A) (B) - Value ● Value
Controlling the Monitor with a PC (LAN) When the PN-ZB01 (optional) is attached, your monitor can be connected to a LAN allowing you to control it from a PC on the LAN. You can also configure the monitor to send e-mail notification when it has a problem. The connection requires a commercially available LAN cable (UTP cable, Category 5, straight through). Network (LAN) Settings to connect to a LAN Set the monitor’s IP address and subnet mask to match the settings of your LAN.
Controlling the Monitor with a PC (LAN) ■ To set from a PC When the monitor is connected to a PC, LAN settings can be configured via PC. Set up process (1) Connect your monitor to a PC (2) Specify the PC’s IP address (3) Configure the monitor’s LAN settings 7. Temporarily change the IP address and subnet mask. To access the monitor as it is shipped from the factory, set as follows. • IP Address: 192.168.150.3 • Subnet Mask: 255.255.255.
Controlling the Monitor with a PC (LAN) 5. Click on “LAN SETUP” under NETWORK. Controlling with a PC ■ Basic operation You use Internet Explorer on a PC on the LAN to control the monitor. 1. Launch Internet Explorer on the PC. 2. In the “Address” box, type “http://” followed by your monitor’s IP address followed by “/”, then press the Enter key. 6. Specify the “DHCP CLIENT”, “IP ADDRESS”,etc.
Controlling the Monitor with a PC (LAN) ■ INFORMATION Information about this monitor appears. ■ CONTROL You can control the operations corresponding to the buttons ( ) on the remote control unit. (See page 5.) TIPS • In standby mode, Power ON is the operation available. • MONITOR POWER turns the monitor power ON/ OFF regardless of the POWER BUTTON setting in the FUNCTION menu. E 32 ■ ADJUSTMENT You can adjust these settings which are also available on the monitor’s menu. • SCREEN (See page 10.
Controlling the Monitor with a PC (LAN) ■ NETWORK (LAN SETUP) This screen allows you to set the settings necessary when the monitor is connected to a LAN. DHCP CLIENT If your LAN has a DHCP server and you wish to obtain an address automatically, change this setting to “ON”. To set the address manually, set this to “OFF”. IP ADDRESS If the DHCP CLIENT is set to “OFF”, specify an IP address. SUBNET MASK If the DHCP CLIENT is set to “OFF”, specify the subnet mask.
Controlling the Monitor with a PC (LAN) ■ NETWORK (GENERAL) This screen allows you to specify the general LAN settings. MONITOR NAME Specify a name for this monitor as it should appear on the Internet Explorer screen. AUTO LOGOUT TIME Specify the time (in minutes) to elapse before automatically disconnecting this monitor from the network. Specify in minutes from 1 to 65535. A value of ‘0’ will disable this function. DATA PORT Specify the TCP port number to use for exchanging data with the monitor.
Controlling the Monitor with a PC (LAN) ■ MAIL (RECIPIENT) This screen allows you to specify the recipients of the e-mail sent periodically or when the monitor has an error. RECIPIENT E-MAIL ADDRESSES Specify the e-mail addresses to send error notification e-mail to. CONDITION Specify the conditions to send mails. When you check PERIODICAL, specify the date and time to send the mails in the PERIODICAL setting. CONFIRMATION Sends test e-mail.
Controlling the Monitor with a PC (LAN) ■ SNMP You can configure settings related to SNMP. Caution • After you set SNMP, click [Switch the main power of monitor off and on now.] or turn off the monitor and then turn it on again with the main power switch. When the monitor restarts, wait about 30 seconds and then start the next operation. TIPS • Depending on the SNMP settings, a short delay may occur before the SNMP is usable.
Troubleshooting If you are experiencing any problem with your display, before calling for service, please review the following troubleshooting tips. The video from the PC RGB input terminals or AV component input terminals does not appear properly. • Is the setting for BNC of INPUT SELECT on the OPTION menu correct? (See pagae 12.) • Is the input signal compatible with this monitor? (See page 41.) There is no picture or sound.
Specifications nProduct Specifications Model LCD component PN-E471 PN-E421 47" Class [46-15/16 inch (119.3cm) 42" Class [42-1/16 inch (106.7cm) diagonal] TFT LCD diagonal] TFT LCD (pixels) 1920 x 1080 Approx. 1.06 billion colors 0.542 mm (H) × 0.542 mm (V) 0.485 mm (H) × 0.485 mm (V) 178° right/left/up/down (contrast ratio ≥ 10) (mm) 40-15/16 x 23 (1039.7 x 584.8) 36-5/8 x 20-5/8 (930.2 x 523.3) Digital (DVI 1.0 standard-compliant), Analog RGB (0.
Specifications nDimensional Drawings Note that the values shown are approximate values. [PN-E471] 4-3/8 [111] 2-11/16 [69] 38-1/16 [967] Unit: inch [mm] 1-7/16 [37] 42-5/8 [1083] VESA holes * 7-7/8 7-7/8 [200] [200] 3-15/16 3-15/16 [100] [100] 7-7/8 [200] Opening height (23-1/8 [588]) 24-3/4 [628] Opening width (41-1/16 [1043]) When mounting the monitor, be sure to use a wall-mount bracket that complies with the VESA-compatible mounting method.
Specifications nPower management This monitor conforms to VESA DPMS and DVI DMPM. Both your video card and computer must support the same standard in order for the monitor’s power management function to work.
Specifications nCompatible signal timing (PC) Screen resolution VESA 640 × 480 800 × 600 848 × 480 1024 × 768 1152 × 864 1280 × 768 1280 × 800 1280 × 960 1280 × 1024 Wide US TEXT Sun 1360 × 768 1400 × 1050 1600 × 1200*1 1680 × 1050 1920 × 1200*1 1280 × 720 1920 × 1080 720 × 400 1024 × 768 1152 × 900 1280 × 1024 1600 × 1000 *1 Displays a reduced image. Hsync Vsync Dot frequency 31.5kHz 37.9kHz 37.5kHz 35.1kHz 37.9kHz 48.1kHz 46.9kHz 31.0kHz 48.4kHz 56.5kHz 60.0kHz 67.5kHz 47.8kHz 60.3kHz 49.
Specifications nPC/AV DVI-D (DVI-D 24 pin) No. input terminal pins Function No. Function No. Function TMDS data 2- 13 N.C. 1 TMDS data 2+ 11 TMDS clock shield 2 TMDS data 2+ 14 +5V 2 TMDS data 2 shield 12 TMDS clock- 3 TMDS data 2/4 shield 15 GND 3 TMDS data 2- 13 CEC 4 N.C. 16 Hot-plug detection 4 TMDS data 1+ 14 N.C. 5 N.C.
PN-E471E421 G EN10B(2)
