PN-HM851 PN-HM751 PN-HM651 PN-HB851 PN-HB751 PN-HB651 LCD MONITOR SOFTWARE GUIDE
Contents Introduction.................................................................................................................................................................... 3 Change this monitor to APPLICATION mode............................................................................................................. 4 LAN terminal / USB port / microSD card slot.............................................................................................................
Introduction By changing the input mode of this monitor to “APPLICATION”, you can use Android applications. The following applications can be used with the monitor. (Factory default) Media Player (see page 7) Play an image file or video file. This lets you use the monitor for simple signage. You can also distribute files from a computer on the same network that has SHARP Content Distributor version 1.4 or later installed. (For details, see the manual for SHARP Content Distributor.
Introduction Change this monitor to APPLICATION mode 1. Turn on this monitor power. 2. Change the input mode to “APPLICATION”. 3. Press the CONTENT MENU button. The base screen of APPLICATION mode (CONTENT MENU screen) appears. 1 2 3 4 1. Applications Select the application you want to use. The application will start. 2. Startup When APPLICATION mode start up, you can set applications to start automatically. 3. Setup You can configure settings for APPLICATION mode. (See page 15.) 4.
Introduction LAN terminal / USB port / microSD card slot USB devices (memory device, keyboard, mouse) and a microSD memory card can be used in APPLICATION mode. You can also connect to a network. 1 * 2 3 1. LAN terminal • You can connect the monitor to a network. 2. USB port • Connect USB devices (memory device, keyboard, mouse) that you want to use in APPLICATION mode. • Connect a USB flash drive to be used with Media Player or HTML5 Browser to one of the USB ports indicated by “*” above.
Introduction Basic actions in APPLICATION mode Use the remote control unit to perform actions in APPLICATION mode. 1. Numeric input buttons Use to enter numbers. 2. ENTER Confirm the selected item. 3. CONTENT MENU Display the CONTENT MENU screen. 1 4. Cursor These buttons are used to perform operations such as selecting applications or items, and moving the cursor. 5. RETURN Returns to the previous screen. 4 TIPS 2 5 3 E 6 • Buttons used vary by application.
Using Media Player Select “Media Player” on the CONTENT MENU screen of APPLICATION mode. TIPS • You can set Media Player to start when APPLICATION mode start up. Select “Startup” on the CONTENT MENU screen and set Media Player. • Multiple USB flash drives cannot be used at the same time with Media Player. If you insert multiple USB flash drives with Media Player, only the flash drive inserted first can be used. About the screen 2 1 3 4 5 6 7 1. Select the media to display the file list.
Using Media Player Using Media Player For the file formats that can be played, see page 13. n Changing a media To connect media, see page 5. 1. Press the or button to select the media. • Internal Storage....Internal memory used in APPLICATION mode (Android) • USB Drive.............USB flash drive connected to a USB port • SD Card................microSD memory card inserted in the microSD card slot n Playing a file 1. Select the file you want to play, and press the ENTER button. The file is selected. 2.
Using Media Player n Editing a file Copying the file to the Autoplay or Schedule play folder (1) Select the file you want to copy. (2) Press the F3 button (Edit). (3) Select “Direct copy”. The list of folders appears. (4) Select the folder. Copying a file (1) Select the file you want to copy. (2) Press the F3 button (Edit). (3) Select “Copy”. (4) Select “Selected File”. (5) Show the file list of the copy destination folder. (6) Press the F3 button (Edit). (7) Select “Paste”.
Using Media Player Settings 1. Press the MENU button (square) on the remote control unit. 2. When you have completed the settings, press the RETURN button. Autoplay Media To use Autoplay (see page 9), set the media you want to play. Files in the following folder of the selected media will play. /mediaplayer/AutoPlay Use SHARP Content Distributor Set whether or not you will use SHARP Content Distributor.
Using Media Player Schedule A playlist can be played at a specified time. Up to 7 schedule items can be registered. The schedule list appears. Select “Reset” in this screen to initialize all schedules. To set or change a schedule, select the schedule you want to set or change. Schedule play Enable/disable the “Schedule”. Start Time Specify the time that will start playing of the playlist. If this monitor is in standby mode, this monitor turns power on and then start play.
Using Media Player Operations during play (1) PLAY: (2) PAUSE: (3) RETURN: (4) STOP: (5) BACK: (6) NEXT: Restart play the paused file. Pause play. Return to the file list. Stop play. Play the previous file. Play the next file. TIPS • Depending on the content, it may be displayed at low resolution when paused.
Using Media Player n Formats supported by Media Player File formats that can be played in Media Player are indicated below. The operation of formats not indicated in the table is not guaranteed. TIPS • Some files may not play even if the format is supported. • Some content types and conditions may cause a longer time until play starts, dropped frames, or delays. • When using for Media Player, check the operation and display quality in advance. Image files Extension *.jpg (*.jpeg) *.bmp *.png *.
Showing Web-based content (HTML5 Browser) n Setting the start page When first using the HTML5 Browser, you must set the content that is shown initially. 1. 2. 3. 4. Select “Setup” on the CONTENT MENU screen of APPLICATION mode. Select “HTML5 Browser”. Select “Default Site”. To show content in local storage (1) Select “File”. (2) Specify the HTML content you want to show. To show content on the Web (1) Select “Web URL”. (2) Enter the URL. (3) Select “OK”.
Setup You can configure settings for APPLICATION mode. Also check the “Menu Items” in the Operation Manual such as video and audio settings. Select “Setup” on the CONTENT MENU screen of APPLICATION mode. n Setup Date & Time Set the date and time. Ethernet (LAN) Set whether or not to use LAN terminal. Set the IP address, subnet mask, and other settings. Wireless Region Select the region to use this monitor. Wireless LAN Set whether or not to use wireless LAN.
Setup Full Screen Mode Enabled............................................ The navigation bar and status bar do not appear. Disabled........................................... The navigation bar and status bar appear. APPLICATION Mode Reboot Set to restart the Android system. A schedule is set by factory default in this monitor that restarts the system at 3:00 AM. Reboot now...................................... Restart the Android system. Schedule..........................................
Updating the Software (Update) Update applications and firmware that are factory-installed in APPLICATION mode. (A network environment that allows access to the internet is required.) Select “Update” on the CONTENT MENU screen of APPLICATION mode. The first time you start the Update, a region selection screen will appear. Select your region. The “Export Law Assurances” appears. Select “YES”. To use the software distributed by the “Update”, you must agree to the “Export Law Assurances”. 1 2 3 4 5 6 1.
Intellectual Property Rights and Other Matters n Information on the software license for this product Software composition The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties.
PN-HM851-HM751-HM651-HB851-HB751-HB651 SG EN18M(1)