PN-ZCMS1 Operation Manual

ManualsBrandsSharp ManualsLCD MonitorPNL652B|PNL752B|PNL862B|PNZCMS1

- EN 1 -

OPERATION MANUAL

VIDEO-CONFERENCING SOUNDBAR PN-ZCMS1

IMPORTANT:

To aid reporting in case of loss or theft, please record the

product’s model and serial numbers in the space provided.

The numbers are located in the rear of the product.

Model No.:

Serial No.:

U.S.A. ONLY

Supplier’s Declaration of Conformity

SHARP VIDEO-CONFERENCING SOUNDBAR, PN-ZCMS1

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device

may not cause harmful interference, and (2) this device must accept any interference received, including interference that

may cause undesired operation.

Responsible Party:

SHARP ELECTRONICS CORPORATION

100 Paragon Drive, Montvale, NJ 07645

TEL: 1-800-BE-SHARP www.sharpusa.com

U.S.A. ONLY

(2)

Printed in China

Summary of content (4 pages)

PAGE 1
OPERATION MANUAL VIDEO-CONFERENCING SOUNDBAR PN-ZCMS1 IMPORTANT: To aid reporting in case of loss or theft, please record the product’s model and serial numbers in the space provided. The numbers are located in the rear of the product. Model No.: Serial No.: U.S.A. ONLY Supplier’s Declaration of Conformity SHARP VIDEO-CONFERENCING SOUNDBAR, PN-ZCMS1 This device complies with Part 15 of the FCC Rules.
PAGE 2
IMPORTANT INFORMATION Specifications WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. Model Audio input/output terminal USB port Supported operating system The lightning flash with arrowhead symbol, within a triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
PAGE 3
Remote Control Unit Operate the remote control unit while facing the front of this product. 1 2 3 4 5 7 8 9 6 1. Mic button Used to switch the mic to ON/OFF. 2. Auto framing button Used to switch the auto framing function to ON/OFF. : ON : OFF When ON, framing is performed automatically in accordance with the speaker. 3. Cursor button Used to move the display range of the camera after zooming the camera. 4. OK button Used to return the zoomed or moved state of the camera to the initial state. 5.
PAGE 4
19. Usage of this product must not be accompanied by fatal risks or dangers that, could lead directly to death, personal injury, severe physical damage or other loss, including nuclear reaction control in nuclear facility, medical life support system, and missile launch control in a weapon system. 20. Do not stay in contact with the parts of the product that become hot for long periods of time. Doing so may result in low-temperature burns. 21. Do not modify this product.