Owners manual

31
E
Menu Items
POWER MANAGEMENT
POWER MANAGEMENT determines whether or not to switch modes from no signal to the input signal standby mode.
AUTOPLAY (See page 22.)
Set the type of le to be automatically played from a USB ash drive or an SD memory card.
SUPPLY USB POWER
ON ............................ Power can be supplied from a powered USB port.
OFF .......................... Power is not supplied from a powered USB port. Turn off the power of the connected device before
changing the setting to OFF. Otherwise there is a risk that data in the connected device will be lost.
ALL RESET
Resets the settings to the factory default settings. (The settings in LAN SETUP are retained.)
TIPS
• If COLOR MODE is set to sRGB, the following items cannot be set.
WHITE BALANCE, PRESET, USER and GAMMA
• When the COLOR MODE is set to HIGH ILLUMINANCE or VIVID, GAMMA can not be adjusted.
• When ENLARGE is used, the SCREEN MOTION function is disabled.
• Even when LED is set to OFF, the power LED will alternately blink red and green if a temperature alert occurs.
• When SUPPLY USB POWER is set to ON, POWER SAVE MODE cannot be set to ON.