Owners manual

39
E
RS-232C command table
How to read the command table
Command: Command eld (See page 35.)
Direction: W When the “Parameter” is set in the parameter eld (see page 35), the command functions as described
under “Control/Response Contents”.
R The returned value indicated under “Reply” can be obtained by setting “????”, “
?” or “???+”
(repeater control) in the parameter eld (see page 35).
Parameter: Parameter eld (See page 35.)
Reply: Response (Returned value)
* : “○” indicates a command which can be used in power standby mode.
“–” indicates a command which cannot be used in power standby mode.
(When POWER SAVE MODE is OFF. When set to ON, RS-232C commands cannot be used.)
Power control/Input mode selection
Function Command Direction Parameter Reply Control/Response contents *
POWER CONTROL POWR W 0 Switches to standby mode.
○
1 Enters the power ON state.
R 0 Standby mode
1 Normal mode
2 Input signal waiting mode
INPUT MODE SELECTION INPS W 0 Toggle change for input mode.
1 DVI-D
2 D-SUB[RGB]
3 D-SUB[COMPONENT]
4 D-SUB[VIDEO]
9 HDMI[AV]
10 HDMI[PC]
11 Media Player
R 1 DVI-D
2 D-SUB[RGB]
3 D-SUB[COMPONENT]
4 D-SUB[VIDEO]
9 HDMI[AV]
10 HDMI[PC]
11 Media Player*
1
*1 If power standby mode is entered when the input mode is Media Player, the input terminal that was used prior to switching to
Media Player will respond, not Media Player.
SCREEN menu
Function
Command Direction
Parameter Reply Control/Response contents *
SIZE (DVI-D, HDMI[PC], D-SUB[RGB]) WIDE WR 1-3 1-3 1: WIDE, 2: NORMAL, 3: Dot by Dot
○
SIZE (HDMI[AV], D-SUB[COMPONENT],
D-SUB[VIDEO], Media Player)
WIDE WR 1, 4, 5 1, 4, 5 1: WIDE, 4: NORMAL, 5: Dot by Dot
AUTO ASNC W 1 When the input mode is D-SUB.
-
INPUT
RESOLUTION
(DVI-D, HDMI[PC],
D-SUB[RGB],
Media Player)
RESOLUTION CHECK PXCK R - Returns current resolution in the form of hhh, vvv.
INPUT RESOLUTION
(HDMI[AV],
D-SUB[COMPONENT],
D-SUB[VIDEO])
RESOLUTION CHECK RESO R - 480i, 480p, 576i, 576p, 1080i, 720p, 1080p
PICTURE menu
Function Command Direction Parameter Reply Control/Response contents *
BRIGHT VLMP WR 0-31 0-31
○
COLOR
ADJUSTMENT
COLOR MODE BMOD WR 0 0 STD
2 2 VIVID
3 3 sRGB (When the input mode is DVI-D, D-SUB[RGB], HDMI[PC])
4 4 HIGH ILLUMINANCE
5 5 Media Player
Controlling the Monitor with a computer (RS-232C)