Owners manual

• When installing, removing or moving the monitor, ensure that this is carried out by at least 2 people.

• Be sure to use a wall-mount bracket designed or designated for mounting the monitor.

• To attach a VESA-compliant mounting bracket, use M6 screws that are 5/16 inch (8 mm) to 3/8 inch (10 mm) longer than the

thickness of the mounting bracket.

Screws (M6)

Mounting bracket

Monitor mounting

5/16 - 3/8 inch (8-10 mm)

• This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary for some materials

such as plaster / thin plastic board / wood before starting installation.

• This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor.

Install by the most suitable method for the material and the structure.

• Do not use an impact driver.

• When moving the monitor, hold the parts marked by

below. Do not hold the LCD panel. This may cause product

damage, failure, or injury.

• After mounting, please carefully ensure the monitor is secure, and not able to come loose from the wall or mount.

• Do not use any screw holes other than VESA holes for installation.

• If you will use the monitor in a at installation (tilted more than 20° (upward or downward) from a perpendicular state with

respect to the horizontal plane), please contact customer service. Special installation conditions apply in a at installation.

Mounting Precautions

(For SHARP dealers and service engineers)