User manual
Table Of Contents
- CONTENTS
- INTRODUCTION
- BEFORE USING THE MACHINE
- COPY FUNCTIONS
- PRINTER FUNCTIONS
- BASIC PRINTING
- PRINTER DRIVER SETUP SCREEN
- SETTING ADVANCED PRINTER FUNCTIONS
- PRINTING MULTIPLE PAGES ON ONE PAGE (N-Up Printing)
- FITTING THE PRINTED IMAGE TO THE PAPER (Fit To Paper Size)
- ROTATE THE PRINTED IMAGE 180 DEGREES (Rotate 180 degrees)
- ENLARGING/REDUCING THE PRINTED IMAGE (Zoom)
- ADJUSTING THE IMAGE EXPOSURE (image adjustment)
- ADDING A WATERMARK TO PRINTED PAGES (Watermark)
- SAVING FREQUENTLY USED PRINT SETTINGS
- SCANNER FUNCTIONS
- TROUBLESHOOTING
- ROUTINE MAINTENANCE
16
COPY FUNCTIONS
MAKING A COPY DARKER OR LIGHTER
If you wish to select the exposure level by yourself, follow the steps below. (Each original type has five exposure
levels.)
Original type
● MANUAL ... Adjust the copy exposure levels as needed to facilitate reading.
● PHOTO ..... Halftones in the photo are reproduced with greater clarity.
1
If the original type is PHOTO, press
the [PHOTO MODE] key.
When this key is
pressed, the [PHOTO
MODE] indicator will be
light.
2
Press the [DENSITY] key ( ) to adjust
the exposure level (1 (light) to 5
(dark)).
The sequence for
displaying the exposure
levels when the
[DENSITY] key ( ) is
pressed: level 3
→ level 2
→ level 1 → level 5 →
level 4.
If exposure level 2 or 4 is
selected, the two indicators of 1, 3 or 3, 5 will light
simultaneously.
SETTING THE NUMBER OF COPIES
Press the [COPY COUNT] key ( ) to set the number of copies.
● The set number of copies appears in the display. A
maximum of 9 copies can be set.
● If you wish to make only a single copy, copying is
possible with the display showing "0".
Exposure value guidelines
1 − 2 Dark originals like newspapers
3 Originals with common exposure levels
4 − 5 Color text, text written in pencil or
light-colored text
Note
If you enter the wrong number, press the
[CLEAR] key ( ) and enter the correct
number.
Note