User manual
Table Of Contents
- Connecting Pin Assignments
- RS-232C Specifications and Commands
- Operating the Projector Using the PJLinkTM Protocol
- Setting up the Projector Network Environment
- Controlling the Projector via LAN
- Controlling the Projector Using Internet Explorer
- Confirming the Projector Status (Status)
- Controlling the Projector (Control)
- Setting and Adjusting the Projector (Settings & Adjustments)
- Setting the Security (Network ‐ Security)
- Making General Settings for the Network (Network - General)
- Setting for Sending E-mail when an Error Occurs (Mail ‐ Originator Settings)
- Setting Error Items and Destination Addresses to which E-mail is to be Sent when an Error Occurs (Mail ‐ Recipient Settings)
- Setting Error Items and the URL that are to be Displayed when an Error Occurs (Service & Support ‐ Access URL)
- Resetting the Lamp Timer of the Projector via LAN
- Troubleshooting
![](/manual/sharp/projector-pg-d2870w/user-manual-english/images/img-11.png)
-11
Setting up the Projector Network Environment
This section describes the basic procedure for using the projector via the network.
If the network is already constructed, the projector's network settings may need to be
changed. Please consult your network administrator for assistance with these settings.
You can make network settings both on the projector and on the computer. The following
procedure is for making settings on the computer.
Network settings on the computer
Connect a LAN cable (Category 5, cross-over type) between the computer and projector.
LAN cable
(commercially available)
1. Connecting the projector to a computer
Page 12
Adjust the IP settings of the computer to enable one-to-one communications with the projector.
Temporarily change
the computer's IP
address.
2. Setting an IP address for the computer
Pages 13, 14
Adjust the projector network settings to conform to your network.
Use Internet Explorer
(version 6.0 or later)
to make various
projector settings.
3. Setting up a network connection for the projector
Pages 15, 16
Microsoft
®
, Windows
®
and Windows Vista
®
are registered trademarks of Microsoft Corporation in the
United States and/or other countries.
PJLink is a registered trademark or an application trademark in Japan, the United States, Canada, E.U.,
China and/or other countries/regions.
All other company or product names are trademarks or registered trademarks of their respective
companies.
•
•
•