Operating instructions

22
Models C709 & C717Important: To the Operator
The FAULT DESCRIPTION can also be found in the
Manager's Menu.
Note: A record of Heat Cycle Data and Lock Out
History can be found in the Manager's Menu.
(See page 27.)
Manager's Menu
The Manager's Menu is used to enter the operator
function displays. To access the Menu, touch the
center of the CONE symbol
on the control panel.
The arrow symbols, the SEL symbol and the CONE
symbol
will be lit when the ACCESS CODE
screen is displayed.
Figure 29
In the Menu program, the arrow symbols and the
SEL symbol will function as menu keys.
UP ARROW - increases the value above the cursor
and is used to scroll upward in text displays.
DOWN ARROW - decreases the value above the
cursor and is used to scroll downward in text
displays.
SEL - advances the cursor position to the right and
is used to select menu options.
Note: The machine will continue operation in the
mode it was in when the Menu was selected.
However, the control keys will not be lit and are
non-functional when the Manager's Menu is
displayed. The control keys are functional in the
Manager's Menu when the CURRENT
CONDITIONS screen is displayed. (See CURRENT
CONDITIONS on page 28.)
Entering Access Code
With the ACCESS CODE screen on the display use
the SEL symbol to set the first code number in the
cursor position. When the correct number is
selected, touch the SEL symbol to move the cursor
to the next number position.
ENTER ACCESS CODE
83 0 9
__
Figure 30
Continue to enter the proper access code numbers
(8309) until all four numbers are displayed, then
touch the SEL symbol . The Manager's menu list will
display on the screen provided the correct access
code is entered.
If an incorrect number is entered for the access
code, the display will exit the Menu program when
the SEL symbol is selected.
Figure 31