Operating instructions

23
Models C709 & C717 Important: To the Operator
080222
Menu Options
Touch the ARROW symbols to move up or down
through the Menu. Select a Menu option by touching
the SEL symbol. Exit the Menu program by selecting
EXIT FROM MENU or touch the CONE symbol
.
The following menu options are listed in the
Manager's Menu.
EXIT FROM MENU
RESET DRAW COUNTER
SET CLOCK
AUTO HEAT TIME
AUTO START TIME
STANDBY MODE
BRUSH CLEAN CYCLE
(C717 only)
MIX LEVEL AUDIBLE
FAULT DESCRIPTION
LOCKOUT HISTORY
HEAT CYCLE SUMMARY
HEAT CYCLE DATA
SYSTEM INFORMATION
CURRENT CONDITIONS
Selecting “EXIT FROM MENU” will exit the
Manager's Menu and the return the control panel
symbols to normal operation.
The SERVING COUNTER screen is used to check
or reset the number of servings dispensed from the
machine. The SERVING COUNTER will
automatically reset to zero when the machine is
brush cleaned.
SERVINGS COUNTER
00
> Next
Figure 32
Reset the SERVING COUNTER by selecting the
SEL symbol to advance to the next screen. Select
the UP arrow symbol to move the arrow (>) to YES
and select the SEL symbol. The servings counter
will reset to zero and exit back to the Manager's
Menu.
RESET DRAW COUNTER
YES
>NO
Figure 33
The SET CLOCK option allows the Manager to
adjust the control clock date and time. The date and
time may only be changed after the freezer has
been manually cleaned but before it has been
placed in the AUTO or STANDBY mode. The
following message will be displayed if the SET
CLOCK option is selected when the machine is not
in a brush clean state.
SET CLOCK
12:01 08/15/2004
NO CHANGES ALLOWED
Press Any Key
Figure 34
To change the date or time, select the SET CLOCK
option in the menu. Touch the UP arrow symbol to
advance the arrow from Exit to Change, then touch
the SEL symbol to select the Change option.
SET CLOCK
12:01 08/15/2004
Change
>Exit
Figure 35