Specifications

E-5
Listening to a Cassette Tape
■ Cassette tape
● For playback, use normal or low-noise tapes
for the best sound. (Metal or CrO
2
tapes are
not recommended.) For recording, use only
normal tapes.
● Do not use C-120 tapes, or poor-quality
tapes, as they may cause malfunctions.
● Before loading a tape into the cassette com-
partment, tighten the slack with a pen or
pencil.
● Cassettes have removable tabs that prevent
accidental recording or erasing. Removing
the tab will protect the corresponding side
from being erased. Cover the tab holes with
adhesive tape to erase or record again.
1 Set the FUNCTION switch to TAPE.
2 Open the cassette compartment by
push-
ing the STOP/EJECT ■
77
77
7 button.
3 Load a cassette into the cassette com-
partment with the side to be played fac-
ing up.
4 Press the PLAY
00
00
0 button.
5 To advance the tape, press the
STOP/
EJECT ■
77
77
7 button, then press the F
FWD 2 button. To rewind, press the
STOP/EJECT
■
77
77
7 button, then press the
REWIND
33
33
3 button.
To interrupt playback:
Press the PAUSE
66
66
6 button during playback.
Press the PAUSE
66
66
6 button again to resume
playback.
To stop playback:
Press the STOP/EJECT
■
7 button.
Precautions:
● Be sure not to press the PLAY
00
00
0 and RE-
WIND
33
33
3 buttons simultaneously, or the
tape will become damaged.
● Before changing from one tape operation
to another, press the STOP/EJECT
■
77
77
7
button.
● Do not press the PAUSE 6 button whilst the
fast forward or rewind operations are in
progress. The F FWD 2 or REWIND 3
button will not be released when the tape
end is reached. Once this occurs, press the
STOP/EJECT
■
7 button.
Side A (1)
Tab for side B (2) Tab for side A (1)
01-E1-E9-QT-90W(S) 01.9.19, 15:296