Specifications

E-7
Mixing from a Microphone
■ Recording of mixed sound
to a cassette tape
You can record mixed sound from an external
microphone and other sources.
1 To protect the speakers from shock
noise and to avoid disturbing noises, set
the VOLUME control to minimum.
2 Connect the microphone to the MIXING
MIC socket.
3 Load a cassette into the cassette com-
partment.
4 Set the FUNCTION switch to RADIO or
LINE.
● Mixing recording is not possible if the FUNC-
TION switch is set to TAPE.
5 Adjust the volume of the audio source
and the microphone using the VOLUME
control.
6 Press the RECORD ● button to begin
recording.
Note:
To record the microphone signals only, load a
cassette into the cassette compartment, set the
FUNCTION switch to TAPE, and then press the
RECORD ● button.
■ Mixing from a microphone
and other sources
You can listen to mixed sound from an exter-
nal microphone and other sources.
1 To protect the speakers from shock
noise and to avoid disturbing noises, set
the VOLUME control to minimum.
2 Connect the microphone to the MIXING
MIC socket.
3 Set the FUNCTION switch to the desired
source (cassette, radio or external unit)
and play it back.
4 Adjust the volume of the audio source
and the microphone using the VOLUME
control.
Notes:
● Be sure that the microphone has a 3.5 mm
(1/8”) diameter plug, and is of 600 ohms
impedance. If not, use an appropriate adap-
tor.
● Use a monaural microphone only. Stereo
microphones are unusable.
● Place the microphone about 10 - 15 cm (4-
6") away from the source.
● If howling occurs, lower the volume or move
the microphone as far as possible from the
speakers.
Caution:
When not using the microphone, remove the
microphone plug from the MIXING MIC socket.
01-E1-E9-QT-90W(S) 01.9.19, 15:298