Specifications
E-8
Using External Units
■ Listening to the playback
sounds from CD player etc.
Set the FUNCTION switch to TAPE before con-
necting or disconnecting any component.
1 Use a connection cable to connect the
CD player etc. to the LINE IN sockets.
(red → right channel, white → left channel)
2 Set the FUNCTION switch to LINE.
3 Play the CD player etc.
Notes:
● To prevent noise and interference when us-
ing the tuner, turn off the power to your CD
player.
● To prevent hum interference, do not place
this unit near television receivers.
■ To record on a tape
1 Load a cassette in the cassette compart-
ment.
2 Press the RECORD
I I
I I
I button.
3 Play the CD player etc.
CD player etc.
■ Headphones
● Before plugging in or unplugging the head-
phones, make sure the volume level is re-
duced.
● Be sure your headphones have a 3.5 mm
(1/8") diameter plug and are between 16
ohms and 50 ohms impedance. The recom-
mended impedance is 32 ohms.
● When headphones are connected, the speak-
ers are disconnected automatically. Adjust the
VOLUME control for desired volume.
01-E1-E9-QT-90W(S) 01.9.19, 15:299