IR, Thank you for purchasing this SHARP product. PRECAUTIONS B Do nct use oil, solvents, patrol, paint thinners or insecticides on the pit. B Do not expose the nit to moisture, 1o temperatures higher than, 60°C (140°F) of to extreme low temperatures. B Keep the unit away from direct sunlight, strong magnetic fields, excessive dust, humidly and electromagnetically equipment {home computers, facsimiles, ere) which generals electrical noise.
Stop Button: M Play/Repeat Button: M/ Pause Button: 1l . Play Indicator: p Track Number Indicator . Repeat Indicator: = . Random Button Track Down/Review Button: e« . Track Up/Cue Button: ppi . Pause Indicator: TE » Random indicator HONEYMOON NN ey 12, Speaker 13. Cassette Compartment 14. Tape Selector/Beat Cancel Switch 15. Headphones Socket 16. Volume Control C13°%° O 17. Tone Control o 18. Extra Bass Button 19. Nonfunctional Mode Switch 20. Band Selector Switch 21. PM Stereo Indicator 22.
TGl Set the FUNCTION switch to RADIO. Set the BAND switch Use the TUNING control to tune in to the desired station To receive an FM roster transmission, set the FUNCTION switch 1o FM STEREO. The FM STEREO indicator lights up when an FM broadcast is in stereo, If the FM reception is weak, set the FUNCTION switch to Fiat MONO. Although the reception changes to monaural, the sound becomes clearer. ¢ U1 & DROWN Rotate the VOLUME control towards MAX 1o increase she volume, and towards MIN to decrease the volume.
T M CD playback Set the FUNCTION switch 1o CD. Press the CD EJECT bitten to pen the CD compartment. Pace & compact disc on the spindle, fable side up. 8 om {8") disc may also be played without an adapter. Close the CD compartment by firmly pushing the corner marked "PUSH CLOSE” The total number of tracks will be displayed for several) seconds. Press the PLAY/REPEAT button to start playback from track 1. The indicator will appear and playback will begin.
RECORDING @ When recording important selections, be sure 1o make a preliminary fest to ensure that the desired material is being properly recorded. ® The ALC (Autocratic Record Level Control) cir cull autocratically controls the level of the input signal used for recording, @ The VOLUME, TONE and X-BASS controls may be adjusted with no effect on the recorded signal. (Variable Sound Monitor) @ Metal and CrO: tapes cannot be used for recording.
® The CD laser pickup points upwards, because of this dust can accumulate, impairing performance. Periodically clean the pickup, using a camera cleaning brush or commercially available CD pickup cleaner. ® Do not ouch the pickup. If fingerprints get on the pickup, clean it gently with a dry cotton swab, @ Dirty heads, capstan or pinch roller can cause poor sound and tape jams, Clean these parts with a cotton swag moistened with commercial head/pinch roller cleaner or isotropic alcohol.