Home Appliances QW-NA26F39DI-DE QW-NA26F39DW-DE Dishwasher EN User Manual 1
Thank you for choosing this product. This User Manual contains important information on safety and instructions intended to assist you in the operation and maintenance of your appliance. Please take the time to read this User Manual before using your appliance and keep this book for future reference.
CONTENTS 1.SAFETY INSTRUCTIONS ................................................................................................ 1 1.1. General Safety Warnings ..............................................................................................1 1.2. Installation Warnings .....................................................................................................2 1.3. During Use................................................................................................................
8.CLEANING AND MAINTENANCE ................................................................................. 22 8.1. Filters ...........................................................................................................................22 8.2. Spray Arms ..................................................................................................................22 8.3. Drain Pump ................................................................................................................
1. SAFETY INSTRUCTIONS 1. General Safety Warnings • Read these instructions carefully before using your appliance and keep this manual for future reference. Please check the packaging of your machine before installation and the outer surface of the machine once the packaging has been removed. Do not operate the machine if it appears damaged or if the packaging has been opened. • Packaging materials protect your machine from any damage that might occur during transportation.
2. Installation Warnings • Choose a suitable and safe place to install your machine. • Only original spare parts should be used with the machine. Unplug the machine before installation. Your machine must only be installed by an authorised service agent. Installation by anyone other than an authorised agent may cause your warranty to be void. Check that the indoor electrical fuse system is connected in line with safety regulations. All electrical connections must match the values on the plate.
pressure exceeds 1 MPa, a pressure relief valve must be fitted between the connection. 3. During Usage • This machine is for domestic use only; do not use • it for other purposes. Commercial use will void the guarantee. Do not stand, sit or place loads on the open door of the dishwasher. Only use detergents and rinse aids produced specifically for dishwashers. Our company is not responsible for any damage that may occur due to misuse. Do not drink water from the machine.
the door for one minute after it has opened. For effective drying, keep the door open for 30 minutes after a programme has ended. Do not stand in front of the door after the auto-open signal sounds. In the case of a malfunction, repair should only be performed by an authorised service company, otherwise the warranty will be void. Before repair work, the machine should be disconnected from the mains. Do not pull the cable to unplug the machine. Switch off the water tap.
CE Declaration of Conformity We declare that our products meet the applicable European Directives, Decisions and Regulations and the requirements listed in the standards referenced. Disposal of your old machine The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
2. INSTALLATION 2.1. Machine positioning When positioning the machine, place it in an area where dishes can be easily loaded and unloaded. Do not put the machine in an area where the ambient temperature falls below 0°C. Read all warnings located on the packaging before removing the packaging and positioning the machine. Place the machine close to a water tap and drain. Take into consideration that the connections will not be altered once the machine is in position.
2.4. Electrical connection WARNING: After removing the top panel of your dishwasher, the machine should be placed in a space of the dimensions shown in the figure below. WARNING: Your machine is set to operate at 220-240 V. If the mains voltage supply to your machine is 110 V, connect a transformer of 110/220 V and 3000 W between the electrical connection. Connect the product to a grounded outlet protected by a fuse complying with the values in the "Technical Specifications" table".
3. TECHNICAL SPECIFICATIONS 1 12 3.2. Technical specifications Capacity 15 place settings Dimensions (mm) Height Width Depth 850(mm) 598(mm) 598(mm) Net weight 53 kg Operating voltage / frequency 220-240V 50 Hz, Total current (A) 10(A) Total power (W) 1900(W) 2 11 3 4 5 10 6 7 9 8 13 3.1. General appearance 1. Worktop 2. Upper basket with racks 3. Upper spray arm 4. Lower basket 5. Lower spray arm 6. Filters 7. Rating plate 8. Control panel 9. Detergent and rinse-aid dispenser 10.
4. BEFORE USING THE APPLIANCE 4.1. Preparing your dishwasher for first use • Make sure the electricity and supply water specifications match the values indicated in the installation instructions for the machine. • Remove all packaging material inside the machine. • Set the water softener level. • Fill the rinse aid compartment. 1 2 3 4 LT SA 4.2 Salt usage (IF AVAILABLE) For a good washing function, the dishwasher needs soft, i.e. less calcareous water.
4.4. Test Strip Run water through the tap (1min.) Keep the strip in the water (1sec) Shake the strip. Wait (1min.) Set the hardness level of your machine. 1 2 3 4 5 6 NOTE: The level is set to 3 as default. If the water is well water or has a hardness level above 90 dF, we recommend that you use filter and refinement devices. 4.5. Water Hardness Table Level German dH French dF British dE Indicator 1 0-5 0-9 0-6 L1 is seen on the display. 2 6-11 10-20 7-14 L2 is seen on the display.
Do not fill detergent into the detergent compartment more than required; otherwise you can see whitish streaks or bluish layers on glass and dishes and may cause glass corrosion. Continued use of too much detergent may cause machine damage. Using little detergent can result in poor cleaning and you can see whitish streaksin hard water. See the detergent manufacturer’s instructions for a further information. 4.9. Filling the detergent Push the latch to open the dispenser and pour in the detergent.
Level Brightener Dose Indicator 1 Rinse-aid not dispensed r1 is shown on the display. 2 1 dose is dispensed r2 is shown on the display. 3 2 doses are dispensed r3 is shown on the display. 4 3 doses are dispensed r4 is shown on the display. 5 4 doses are dispensed r5 is shown on the display.
5. LOADING YOUR DISHWASHER For best results, follow these loading guidelines. Loading the household dishwasher up to the capacity indicated by the manufacturer will contribute to energy and water savings. Manual pre-rinsing of tableware items leads to increased water and energy consumption and is not recommended You can place cups, glasses, stemware, small plates, bowls, etc. in upper basket. Do not lean long glasses against one another or they cannot remain steady and may receive damage.
SOFT TOUCH Top basket Height Adjustable Rack These racks are designed to increase the capacity of the top basket. You can pla-ce your glasses and cups on the racks. You can adjust the height of these racks. Thanks to this feature, you can place different sizes of glasses under these racks. Thanks to height adjustment plastics mounted on the basket, you can use your racks in 2 different heights.
Upper Cutlery Basket The upper cutlery basket is designed for the placement of large and small cutlery and uten 1 2 WARNING: Knives and other sharp objects must be placed horizontally in the cutlery basket.
5.2. Alternative basket loads Lower basket Un chargement incorrect peut entraîner de mauvaises performances de lavage et de séchage. Veuillez suivre les recommandations du fabricant pour obtenir un bon résultat. Note importante pour les laboratoires de test. Unsuitable items for dishwashing • Cigarette ashes, candle leftovers, polish, paint, chemical substances, ironalloy materials. Upper basket Incorrect Loads Incorrect loading can cause poor washing and drying performance.
6. PROGRAMME TABLE Water consumption (l/cycle) Electiricity consumption (kWh/ cycle) Program Duration (h:min) Amount of Detergent: A: 25 cm3 B: 15 cm3” Level of Soil: Type of Soil: Program Name: 6.6 0.340 00:14 B Light Fastest program for lightly soiled and recently used dishes and suitable for 4 place settings. Quick Wash 14’ P1 10.9 0.650 00:30 A Light Suitable for lightly soiled dishes and quick wash. Quick 30’ 40° P2 9.0 0.
• The program duration may change according to the amount of dishes, the water temperature, the ambient temperature and selected additional functions. • Values given for programmes other than the eco programme are indicative only • Eco programme is suitable to clean normally soiled tableware, that for this use, it is the most efficient programme in terms of its combined energy and water consumption, and that it is used to assess compliance with the EU ecodesign legislation.
7. THE CONTROL PANEL 1 9 8 NOTE: Select the Extra Fast Option to decrease the duration of a programme, providing more economical water usage. The Extra Fast Indicator will illuminate. 7 2 6 3 4 5 Switch the machine on by pressing the On/ Off button. The On/Off lamp lights as long as the machine is on. Select a suitable programme by pressing the Program button (2). Press the Start/Pause button (7) to start the programme.
NOTE: If you switch the machine to off position after selecting the delay time and the programme has started, the delayed time is cancelled. Press the Start/Pause button for 3 seconds. NOTE: When there is insufficient softening salt, salt lack warning indicator (9) turns on and you should fill the salt chamber. NOTE: When the rinse aid level is low, the rinse aid lack warning indicator (8) turns on and you should fill the rinse aid chamber. During cancellation, the End light blinks.
7.1. Changing a programme If you would like to change the programme when the machine is already running. When the End light turns on, switch your machine off by pressing the On/Off button. Press the Start/ Pause button. Switching the Machine Off After the programme stops, select your desired programme via the programme selection button. Switch your machine off with On/Off button after the programme has ended and the End light turns on. Pull the plug out of the outlet. Turn of the water tap.
8. CLEANING AND MAINTENANCE Cleaning your dishwasher is important to maintain the machine’s service life Make sure that the water softening setting (If available) is done correctly and correct amount of detergent is used to prevent limescale accumulation. Refill the salt compartment when the salt sensor light comes on. Oil and limescale may build up in your Dishwasher over time. If this occurs: • Fill the detergent compartment but do not load any dishes.
8.3 Drain Pump Large food residues or foreign objects which were not captured by the filters may block the waste water pump. The rinsing water will then be above the filter. Warning Risk of cuts! When cleaning the waste water pump, ensure that you do not injure yourself on pieces of broken glass or pointed implements. In this case: 1. First always disconnect the appliance from the power supply. 2. Take out baskets. 3. Remove the filters. 4. Scoop out water, use a sponge if required. 5.
FAULT Whitish stains remains on dishes. POSSIBLE CAUSE TROUBLESHOOTING Not enough detergent used. Use the correct amount of detergent, as instructed in the programme table. Rinse aid dosage and/or water softener setting set too low. Increase rinse aid and/or water softener level. High water hardness level. Increase water softerner level and add salt. Salt compartment cap not closed properly. Check that the salt compartment cap is closed properly. Drying option is not selected.
AUTOMATIC FAULT WARNINGS AND WHAT TO DO TROUBLE CODE POSSIBLE FAULT WHAT TO DO Make sure the water inlet tap is open and water is flowing. FF Water inlet system failure Separate the inlet hose from the tap and clean the filter of the hose. Contact for service if the error continues. F5 Pressure system failure Contact for service. F3 Continuous water input Close the tap and contact for service. Water discharge hose and filters may be clogged. F2 Inability to discharge water Cancel the program.
Service & Support 52333692 R60 Visit Our Website sharphomeappliances.
