Specifications

14
A40085 SEEG R25AT O/M
1 0 0
Please check the following before calling for service.
1. Power Supply
Check the power plug is properly connected to a suitable wall outlet.
Check the line fuse/circuit breaker is functioning properly.
2. When the door is opened:
A. Does the oven lamp light? YES ____ NO _____
B. Does the cooling fan work? YES ____ NO _____
(Put your hand over the rear ventilation opening.)
3. Place one cup of 150 ml water in the oven and close the door securely.
Touch these keys.
A. Does the cook indicator go on? YES ____ NO _____
B. At the end of this time, is the water warm? YES ____ NO _____
If "NO" is the answer to any of the above questions, call your dealer or an authorized SHARP Service Agent and
report the results of your check.
Door
To remove all trace of dirt, regularly clean both sides
of the door, the door seals and adjacent parts with a
soft, damp cloth. Do not use abrasive cleaner.
Air intake filter
SERVICE CALL CHECK
Keep clean the air intake filter. To clean the air intake
filter you have to pull the two clips on the filter and to
remove the air intake filter. Wash the air intake filter in
mild soapy water and dry with a soft cloth. After cleaning
re-install the air intake filter to the oven. Clean the air
intake filter once every two weeks.
CAUTION:
DO NOT OPERATE THE OVEN WITHOUT THE
AIR INTAKE FILTER IN PLACE.
ATTENTION ONLY IN GERMANY:
This appliance has to be checked at least once a year
by an expert (SHARP Service). The result of this check
has to be recorded. The customer is responsible to call
an authorized SHARP Service Agent for that annual
check.
Hole
Oven
Hole
Clip
Air intake filterClip
SEEG R23AT Eng,P13-17 03.7.23, 5:23 PM14