Specifications

6
* This oven is preset with the OPERATION GUIDE in English.
To assist you in programming your oven, the operation guide will appear in the display.
In this manual, the display of operation guide is abbreviated.
* You can get operation guide in English, Malay or Russian.
To change the language, see page E-30.
Before Operating
Getting Started
Step
Procedure Pad Order Display
Plug the oven into a power point.
1
Close the oven door.
as above
2
Press the STOP/CLEAR pad so that the
oven beeps.
Only the dots will remain.
Stop/Clear
Press the STOP/CLEAR pad once to:
1. Stop the oven temporarily during cooking.
2. Clear if you make a mistake during programming.
Press the STOP/CLEAR pad twice.
To Cancel a Programme During Cooking
Some smoke and odor may occur for a while at the beginning of GRILL, GRILL MIX or AUTO GRILL mode,
but the oven is not out of order.
To remove the cause of the smoke and odor, operate the oven without food for 20 min. on Grill before
the first use and after cleaning.
Heating without Food
Step
Procedure Pad Order Display
Ensure that no food is in the oven.
Press the GRILL pad.
Enter the heating time (20 min.).
Press the INSTANT COOK/START pad.
IMPORTANT:
During this operation, some smoke and
odor will occur. Therefore open the win-
dows or run the ventilation fan in the
room.
COOK is flashing.
Open the door to cool the oven cavity.
WARNING:
The oven door, outer cabinet and oven cavity will become hot and pay attention to avoid burn
when cooling the oven.
The timer will begin to count
down. When it reaches zero,
all indicators will go out and
audible signal will sound.
0 002
2
3
4
1
3
COOK
COOK