Specifications

Installation TDB3108, WF3208
Bradley • 215-1187 Rev. P; ECN 13-00-001 4/30/2013 13
4b
Adaptive Infrared Assembly for B and H Units and Units with
Tie Pipe Option
A
Install hemmed end (not sharp end) of
support tube with gasket onto bowl.
B
Connect 1/2" supply tubing to sprayhead with
3/8" NPT to 1/2" tube connector and place
sprayhead onto support tube. Run the tubing
down through the support tube and connect
to valve tube connector.
C
Insert the 1-1/2" vent pipe (supplied by
installer) down through the support tube and
thread into vented trap.
Cover
Actuator
Module
Assembly
Sprayhead
Tie Bar
Supply Tube
Section View of
B/H Unit Assembly
Cover
(107-185 (B))
(107-048 (H))
Sprayhead
(S05-054)
Drain
(S45-273)
Terreon Deep Bowl (ADA bowl shown,
classic bowl is optional) Part no. varies
with color of bowl. Contact your Bradley
Rep. for assistance.
Access Panel
(186-1456)
Pedestal Assembly
(S17-242)
Vented Trap
(111-024)
Support
Tube Gasket
(125-011)
Support Tube
STD (S57-005)
JUV (S57-006)
I.R. Module Assembly
(S50-344)
Tie Bar Pre-Pack
(S45-056)
1/2" Supply Tube
Valve Assembly
(S50-369)
B/H
(B Shown)