Beam 200W Moving Head Light FL-202 BEAM200W-F1000363 USER MANUAL www.flash-butrym.
Catalogue I II HI IV V VI VII VIII IX Warning……………………………………………….1 Statement……………………………………………….1 Safety Precautions………………………….…………..1 Technology Parameter………………………..………..2 Warning for Replace Lam…………………..…………3 Warning for Operation…………………………..……..4 Sketch map of Connection……………………………4 Menu Function……………………………………….……5 Channels Control……………………………………..……6 www.flash-butrym.
The New moving head Beam FL-202, equipped with a revolutionary R5 190W discharge lamp (8000 ˚ F, 2000 hrs.). This Beam FL-202 moving head has a light output that is comparable to devices with 700W discharge lamps. Compact, lightweight, very sharp and stream bright light, and with very attractive price that you will never want to go back Warning To reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture. Do not spill water or other liquids into or on to your unit.
FEATURES High quality R5 190W discharge lamp (8000o F, 2000 hours) Beam Angle 0-4* Resetting the lamp on and off using the DMX512 signal Extremely fast and precise movement Electronic monitoring of the error message Ultra compact design, light weight device (17.2 kg) DYNAMIC EFFECTS The color wheel (14 colors + white) Gobo wheel (17 gobo + open) Prism (8 - Wall rotary) Dimmer (0-100%) Electronic Focus Frost Strobe (0-20hz) PAN: 540o TILT: 240o Speed control PAN, TILT DM www.flash-butrym.
CONTROL AND PROGRAMMING 1. Control of the market definition PAN and TILT (8bit or 16bit) 2. DMX 512: 16, 17 or 20 channels 3. and addressing settings: graphic LCD with back light OPTICS 1. Viewing angle: 0-4* 2. 3 lenses 3. Electronic Focus 4. 8-wall rotating prism 5. The Power of Light: Light power: LUX: 142500 @ 10m, 84300 @ 15m 6. The color wheel (14 dichromate filter + white) 7. Gobo wheel (17 gobo + open) EXECUTION 1. Aluminum construction with plastic 2. Two side handles for transportation 3.
V Warning for Replace bulb VI Warning for Operation VII Sketch map of DMX XLR Connection Building a serial DMX chain: 1.Connect the DMX output of the first fixture in the DMX chain with the DMX input of the next fixture. Always connect one output with the input of the next fixture until all fixture are connected 2.Caution:At the last fixture, the DMX cable has to be terminated with a terminator.
Channel 16ChannelMode Color Wheel 17ChannelMode Color Wheel 20Channel Mode Color Wheel Stop/Strobe Stop/Strobe Stop/Strobe 3 Dimmer Dimmer Dimmer 4 Gobo Wheel Gobo Wheel Gobo Wheel 5 Prism Prism Prism 6 7 Prism Rotation Prism Rotation Prism Rotation Function Function Function 8 Frost Frost Frost 9 Focus Focus Focus 10 X X X 11 12 X fine X fine X fine Y Y Y 13 Y fine Y fine Y fine 14 Macro Function Macro Function Macro Function 15 Reset Reset Reset 16
Channel Function DMX Value 196 - 255 188 128 - 195 187 124 120 116 111 107 CH1 CH2 Color wheel Strobe www.flash-butrym.
CH3 8-63 2-7 0-1 250 - 255 249 - 244 Strobe, Slow-Fast Open Close Gobo 16 Shake, Slow-Fast Gobo 15 Shake, Slow-Fast Linear Single-Step Single-Step Linear Linear 237 231 224 218 212 205 199 192 186 180 173 167 160 118 - Gobo 14 Shake, Slow-Fast Gobo 13 Shake, Slow-Fast Gobo 12 Shake, Slow-Fast Gobo 11 Shake, Slow-Fast Gobo 10 Shake, Slow-Fast Gobo 9 Shake, Slow-Fast Gobo 8 Shake, Slow-Fast Gobo 7 Shake, Slow-Fast Gobo 6 Shake, Slow-Fast Gobo 5 Shake, Slow-Fast Gobo 4 Shake, Slow-Fast Gobo 3 Shake, Slow-
CH9 CH10 CH11 CH12 CH13 Focus X X Fine Y Y Fine CH14 Macro Function CH15 CH16 CH17 Rest Lamp on/off X/Y Speed 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 25 - 255 12 - 24 0 - 11 128 - 255 Focus, Far-close 77 - 127 X/Y Rest 26 - 76 0 - 25 Effect reset(Color Wheel, Gobo wheel, Prism etc.) Nothing 101 - 255 Lamp On 26 - 100 Lamp Off 0 - 25 251 - 255 0 - 250 0- 5 Nothing Fastest Fast - Slow Fastest Pan rotation 0˚-540˚ Pan Fine rotation 0˚-2.