User manual

www.flash-butrym.pl Page 3
The New moving head Beam FL-202, equipped with a revolutionary R5 190W
discharge lamp (8000 ˚ F, 2000 hrs.). This Beam FL-202 moving head has a light
output that is comparable to devices with 700W discharge lamps. Compact,
lightweight, very sharp and stream bright light, and with very attractive price that you
will never want to go back
Warning
To reduce the risk of electrical shock or fire, do not expose this unit to rain or
moisture.
Do not spill water or other liquids into or on
to your unit.
During long periods of non-use, disconnect the unit’s
main power.
It should be installed in a well-ventilated place,
at a distance of 50 centimeters or more with the walls.
At the same time, please check if the fan and ventilation holes are unobstructed.
Statement
The product has perfect performance and integrity packing. All users should be
strictly comply with the warning and operating instructions as stated. Or we aren’t in
charge of any result by misusing. Any damage resulting by misuse is not within the
company’s warranty. Any fault or problem caused by Note: All information is subject
to change without prior notice.
Safety Precautions
In order to guarantee the product’s life, please don’t put in the damp places or even
the environment over 40degress.
Always mount this unit in safeand stable matter.
The qualified professionals are allowed to carry
out the lamp installation, operation and maintenance, but they must guarantee to
operate in strict accordance with the instructions referred to.
Using lamp, the change rate of Power voltage should
be within+10%, If the voltage is too high, it will shorten
the light’s life; if it’s not enough, the lamp will be dark.
Please restart it after turning off light for 20 minutes until full-cooling. Frequent
switching will reduce the life span of lamps and bulbs; intermittent using will improve
the life of bulbs and lamps.
In order to make sure the product is used well, please read the Manual carefully