User manual

www.flash-butrym.pl Page 6
V Warning for Replace bulb
VI Warning for Operation
VII Sketch map of DMX XLR Connection
Building a serial DMX chain:
1.Connect the DMX output of the first fixture in the DMX chain with the DMX input of the next
fixture. Always connect one output with the input of the next fixture until all fixture are connected
2.Caution:At the last fixture, the DMX cable has to be terminated with a terminator. Solder a 120
0 resistor between
signal (-) and Signal (+) into a XLR plug and plug it in the DMX output of the last fixture
1.