Instruction manual

MS 201 T
English
27
At temperatures below
approx. +50 °F (+10 °C)
N Removing the chain sprocket cover
N Set shutter (1) to "winter operation"
r
In the "winter operation" setting, heated
air is drawn in from around the cylinder
and mixed with cold air. This prevents air
filter and carburetor icing.
At temperatures above
approx. +50 °F (+10 °C)
N Always return the shutter to the
position for "summer operation" s
The four positions of the Master
Control lever
Stop 0 – engine off – ignition is switched
off
Run F – engine is running or can start
Warm start n – this position is for
starting the warm engine – the master
control lever returns to run when the
throttle trigger is squeezed
Cold start l – this position is for
starting the cold engine
Full-time usage: every 3
months
Part-time usage: every 6
months
Occasional usage: every 12
months
Winter Operation
Risk of engine malfunction –
overheating!
0011BA006 KN
Starting / Stopping the
Engine
162BA003 KN