Instruction manual

MS 201 T
English
29
N Push the hand guard (1) forwards –
the chain is blocked
N Simultaneously press the throttle
trigger lockout (2) and throttle
trigger (3) – set master control
lever (4)
Position cold start l
– If engine is cold (even if the engine
has stalled during opening of
throttle after starting)
Position warm start n
– If engine is warm (once the engine
has been running for approx. one
minute)
N Hold and start the chain saw
When the engine has turned over for
the first time
N Move the Master Control lever (1) to
the position warm start n
N Hold and start the chain saw
Once the engine is running
N Press the throttle trigger lockout and
blip the throttle trigger (2); the
master control lever (1) jumps to
run F and the engine begins to idle
N Pull the hand guard toward the
handlebar
The chain brake is released – the chain
saw is ready for use.
0012BA009 KN
2
3
4
H
L
1
STOP
0012BA010 KN
1
H
L
STOP
0012BA011 KN
2
1
H
L
STOP
0012BA002 KN
H
L