Specifications

BEFORE OPERATING
* Before operating your new microwave oven make
sure you read and understand this operation
manual completely.
* Before the oven can be used, follow these
procedures:
1) Plug in the oven. Close the door. The oven display
will then begin flashing [o ,-,• c.,_-,].
2) Touch the STOP/CLEAR pad.
: j will appear.
3) Touch CLOCK pad, to set clock.
To Set the Clock
* Suppose you want to enter the correct time of day
12:30 (A.M. or P.M.)
r
Procedure
1. TIMER Touch CLOCK
CLOCK pad.
2. _] 2___ Enterthecorrect
time of day by"
touching the
numbers in
sequence.
TIMER Touch CLOCK
3. CLOCK pad again.
k. )
This is a 12 hour clock. If you attempt to enter an
incorrect clock time, ,L ,'---iwill appear in the
display. Touch the STOP/CLEAR pad and re-enter
the time.
* If the electrical power supply, to your microwave
oven should be interrupted, the display will
intermittently show [C'i_: S,S'I after the power is
reinstated. Ifthis occurs during .cooking, the program
will be erased. The time of day will also be erased.
Simply touch STOP/CLEAR pad and reset the
clock for the correct time of day.
Stop/Clear
Touch the STOP/CLEAR pad to:
1. Erase ifyou make a mistake during programming.
2. Cancel timer.
3. Stop the oven temporarily during cooking.
4. Return the time of day to the display.
5. Cancel a program during cooking, touch twice.
MANUAL OPERATION
Time Cooking
Your oven can be programmed for 99 minutes 99
seconds (99.99). Always enter the second.,; after the
minutes, even if they are both zeros.
* Suppose you want to cook for 5 minutes at 100%.
Procedure
1. Enter cooking
time.
T___J Touch START2. £TART pad.
To Set Power Level
There are eleven preset power levels.
Using lower power levels increases the cooking time
which is recommended for foods such as cheese, milk
and long slow cooking of meats. Consult cookbook or
recipes for specific recommendations.
rTouch POWER
LEVEL Pad
Once,
then Touch
POWER LEVEL
9
8
7
6
5
4
3
2
1
0
Approximate
Percentage
of Power
100%
90%
8O%
70%
60%
50%
40%
30%
20%
10%
O%
Common
Words
for
Power Levels
High
Medium High
Medium
Med. Low/Defrost
Low
J
* Suppose you want to defrost for 5 minutes at 30%.
Procedure
1. Enter defrosting
time.
2. ] POWER-q i31 Enter power
_L_E_-VEL_L___J level.
3. I START Touch START
pad.
9