Technical data

13773-001
10-30
Page 2 30 Nov 2000
1
Park and moor airplane. (Refer to 10-20)
(b) Engine Preservation
1
Refer to the Teledyne Continental Motors Maintenance and Operators Manual
listed in the List of Publications in the front of this publication.
(c) Fuel Supply
1
Drain fuel tanks. (Refer to 12-10)
(d) Landing Gear, Wheels, and Tires
1
Clean brake assemblies.
2
The wheels should be turned three to four revolutions per 30 days to prevent corro-
sion.
3
Touch up all spots where paint has been chipped from the wheels.
4
Wipe tires with dry cloth, and treat with tire protector spray.
5
Turn wheels. Mark tire position and date with chalk.
6
Check air pressure periodically and inflate tires as necessary. (Refer to 12-10)
Note: It is advisable that unserviceable tires be used for prolonged storage.
(e) Electrical System (Refer to 24-30)
1
Remove battery and ELT battery and store in accordance with standard practices.
2
Clean battery box and battery cable terminals to neutralize any battery acid that
may be present.
(f) Lubrication
1
Lubricate according to lubrication schedule. (Refer to 12-20)
(g) Propeller
1
Clean propeller to remove dirt, oil, and bug accumulation. (Refer to 12-20)
2
Coat blades with preservative oil and wrap with moisture proof material.
(h) Instruments
1
Clean and cover instruments and panel. Take any additional precautions according
to the manufacture.
(i) Seats
1
Clean and install protective covers. (Refer to 12-20)
(j) Loose Equipment
1
Remove all loose equipment and store.
(k) Windshield and Windows
1
Clean and install covers over windshield and windows. (Refer to 12-20)
(l) Airframe
1
Cover static port and all ventilation openings.
(3) Preparation for Service
(a) Engine Preparation for Service
1
Refer to the Teledyne Continental Motors Maintenance and Operators Manual
listed in the List of Publications in the front of this publication.
(b) Remove all covers, tapes and tags from airplane.
(c) Reinstall engine battery and ELT battery. (Refer to 24-30)
(d) Fill fuel tanks (if applicable). (Refer to 12-10)
(e) Thoroughly clean and visually inspect airplane. (Refer to 12-20)