Technical data

13773-001
10-30
Page 330 Nov 2000
WARNING:
Before rotating the propeller blades, make certain the magneto/start
switch is OFF, throttle is in CLOSED position, and the mixture control
is in the IDLE CUT-OFF position. Always stand clear while turning the
propeller.
(f) Rotate propeller by hand through all compressions of the engine to check for liquid lock
and to clear excess preservative oil from cylinders.
(g) Start engine in normal manner. (Refer to POH, Chapter 4)
(h) Perform normal warm-up and Operational Check. (Refer to 5-30)