Technical data

13773-001
12-20
Page 10 30 Nov 2000
(d) Wash the airplane using plenty of clean, fresh water.
(e) Rinse the airplane with fresh, clean water.
(f) Dry the airplane using a soft chamois.
(g) Remove all pitot head, brake disc and static port covers.
WARNING:
Inspect the pitot head and static port orifices for any obstructions or
restrictions. Never allow any of the aforementioned orifices to remain
obstructed or restricted. If any obstructions or restrictions are found
they must be corrected before the airplane is allowed back into ser-
vice.
(2) Windshield/Windows
Before cleaning an acrylic window, always rinse it free of all dust particles before using a clean
sponge or chamois. Never rub dry acrylic. Dull or scratched window coverings may be polished
using a special acrylic polishing paste. Only clean acrylic windows with an antistatic acrylic
cleaner. Remove grease or oil with a soft cloth saturated with kerosene.
(a) Acquire necessary tools and equipment.
CAUTION: Never use de-icing fluid, household window cleaning sprays, lacquer thin-
ner, gasoline, acetone, carbon tetrachloride, benzene, or fire extinguisher
fluid to clean windows or windshields. The use of such chemicals will soften
or craze an acrylic surface. Never use rain repellent on acrylic surfaces.
Always cover the windshield and windows when applying any chemicals
(near the vicinity) that may damage them. Never use sun shades or allow
sun visors to remain in the lowered position when the airplane is parked in
direct sunlight or crazing and the formation of bubbles may occur.
Note: Prior to cleaning windows, place the airplane in a shaded area to allow the
windows to cool down. When polishing an acrylic surface, use a polish
meeting Federal Specification P-P-560.
(b) Remove any grease or oil using a soft cloth saturated with kerosene; then rinse the win-
dow with plenty of clean, fresh water.
(c) Rinse the windshield free of all dust and contaminates with plenty of clean, fresh water.
(d) Using a moist sponge or chamois, wipe the windows clean of all contaminates.
(e) Dry the windows using a soft chamois.
Description P/N or Spec. Supplier Purpose
Acrylic polish & sealant SP-PL16 LP Aero Plastics, Inc.
Jeannette, PA
Polishing outer window
surface
Acrylic plastic cleaner SP-210A LP Aero Plastics, Inc.
Jeannette, PA
Polishing inner window
surface
Cotton cloth (clean white,
lint free)
- Any Source General cleaning proce-
dures
Kerosene - Any Source Grease and oil removal